homeassistant

19585 readers

17 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 3 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world

Bryant Heat Pump integration (lemmy.world)

submitted 1 day ago by AA5B@lemmy.world to c/homeassistant@lemmy.world

3 comments fedilink hide all child comments

Does anyone have experience integrating a Bryant mini-split Heat Pump? …. It’s made by Carrier so Carrier heat pump may be similar.

It looks like the strategy is

install a “System Access Module”
download Bryant home app
set up and account
connect the SAM to the account over WiFi
there’s an integration which probably connects to the cloud service

This is going to be expensive, getting the SAM installed (new system so I don’t want to risk losing warranty by doing it myself) so I need to know what to expect and whether it is worth it

The unit has many modes and controls whereas traditional thermostat just holds a temperature. Will this let me automate additional modes like “dry”, fan speed, vent direction, etc?
Is there a better approach with local control? I have zwave, Zigbee, thread meshes so any of those would be ideal.
I have an old remotec ir blaster that I used on my previous ac, but have not yet tried on this one. Is that my only local choice?
Can anyone speak to ir blaster improvements since broadlink bought remotec? Is there anything worth buying an updated device?

you are viewing a single comment's thread
view the rest of the comments

[–] dan@upvote.au 3 points 1 day ago* (last edited 1 day ago) (1 children)

I'd make sure there's an officially supported integration, or one that's 100% local (no cloud needed).

It'd be frustrating to spend money and get everything set up only for Bryant/Carrier to decide that they don't like Home Assistant any more and block an unofficial integration.

Maybe someone else has better advice for your particular setup.

For my house, it had central heating so I ended up replacing that with a central heat pump HVAC system that uses a regular thermostat (Gree Flexx with an Ecobee). I didn't want to deal with anything proprietary. The Ecobee supports local control via HomeKit, which Home Assistant supports natively (no Apple device needed).

[–] AA5B@lemmy.world 1 points 20 hours ago* (last edited 20 hours ago)

I already asked about that, since I already have an ecobee and have it integrated with HA. But nope, they claim it only supports a couple specific Honeywell thermostats

The local option has a lot of uncertainty. I’d still need to get the access module installed but it has a serial port. I see writeups where people use a serial to usb adapter to connect directly to HA. I can’t do that do would need to figure an additional layer of connectivity, maybe an eco or pi zero can send that over WiFi or Zigbee or something