Buildapc

3788 readers

4 users here now

founded 1 year ago

MODERATORS

Lemmenmo@lemmy.world

Will I need to overclock RAM again? (reddthat.com)

submitted 1 month ago by Telorand@reddthat.com to c/buildapc@lemmy.world

16 comments fedilink hide all child comments

I'm saving up to get a 5700X3D around Christmas, upgrading from a 5600G, but I want to make sure I prepare properly before I do the swap.

The RAM I bought couldn't match the C18 @ 4000 M/Ts advertised and still remain stable, but I managed to manually overclock to C16 @ 3666. Should I drop to JDEC specs before I upgrade, or is it a non-issue?

you are viewing a single comment's thread
view the rest of the comments

[–] BirdyBoogleBop@lemmy.dbzer0.com 2 points 1 month ago* (last edited 1 month ago) (5 children)

It should rember the RAMs clockspeed but watch out when taking the cpu out.

If you got the 5600g when it released the thermal paste might be hard as concrete by now. I had to rip my CPU out the socket and pry it off the cooler afterwards with a scary amount of force.

I dunno what AMD uses for thermal paste but we should be using it to construct megastructures rather than a thermal compound.

I also forgot to update my BIOS so had to put the old CPU back in again to do the upadate. So definitely check your BIOS versions CPU compatibility first. Updating the BIOS will wipe out all your configurations though

[–] Telorand@reddthat.com 1 points 1 month ago (3 children)

That's a good point. I dunno if my current BIOS version would recognize the 5700X3D, so might need to check on that.

[–] NateSwift@lemmy.dbzer0.com 3 points 1 month ago (2 children)

Worth noting that running a medium to heavy load on the cpu for a bit will generally loosen the thermal pate a bit

[–] Telorand@reddthat.com 1 points 1 month ago

I'ma run prime95 for a bit first.

[–] catloaf@lemm.ee 1 points 1 month ago

And use something like dental floss or fishing line to saw through it instead of ripping components off the CPU.

load more comments (1 replies)