Home Automation

79 readers

2 users here now

Home automation is the residential extension of building automation.

It is automation of the home, housework or household activity.

Home automation may include centralized control of lighting, HVAC (heating, ventilation and air conditioning), appliances, security locks of gates and doors and other systems, to provide improved convenience, comfort, energy efficiency and security.

Warning: Working with electricity can result in injury, property damage, or even death if it is not done properly. Please keep this in mind while assisting others. If you are not sure about what you are doing, hire a licensed professional.

Rules

No abusive behaviour. This is a forum for friendly discussion; personal attacks will not be tolerated and you will be banned without warning.
Referral/affiliate links are NOT ALLOWED!
NO POLITICS! There are plenty of other communities to discuss them; this is not one.
When posting project details must be included. Posting a video or image without detail will result in a removed post and may result in a ban.
Crowdfunding links are not allowed.
Reposts, low-effort content and karma farming may be removed at the discretion of the mods. Posters may be banned without warning.

founded 1 year ago

MODERATORS

communick@selfhosted.forum

Automate my hot water heater (alien.top)

submitted 1 year ago by tortuga3385@alien.top to c/homeautomation@selfhosted.forum

21 comments fedilink hide all child comments

I am typically the first one in my house to take a shower and I like hot showers. I have noticed that if I take a shower first, the hot water is not that hot and doesn't last very long. But if others take showers before me and the hot water has to recharge then the hot water is HOT and lasts a long time.

I have a 50 gallon hot water tank.

The only two things I have (besides sinks and showers) that use hot water are a dumb dishwasher and a dumb washing machine.

What I was thinking was to set up an automation in HA to somehow trigger something to use hot water for like 10 minutes in order to get the hot water heater to recharge.

Any ideas?

you are viewing a single comment's thread
view the rest of the comments

[–] chriswood1001@alien.top 1 points 1 year ago

Look into hot water circulating pumps.

They may be retrofit into existing home plumbing, are designed to address this exact use case, can be automated (old school timer or more intelligent with a smart switch), and will be significantly better for the environment/ your water bill. Essentially, there's a pump located in your hot water tank closet and a small valve installed under your bathroom sink tap. They cost about $100 (though they say that's recouped quickly because you're not letting cold water run as long anymore), though you'll likely need a plumber — it's straight forward and common.

Now attached to a smart plug you could trigger it to turn on 10 minutes before your morning alarm, not run when you're on vacation, run when your location leaves the gym (assuming you shower at home), etc.