Home Automation

79 readers

2 users here now

Home automation is the residential extension of building automation.

It is automation of the home, housework or household activity.

Home automation may include centralized control of lighting, HVAC (heating, ventilation and air conditioning), appliances, security locks of gates and doors and other systems, to provide improved convenience, comfort, energy efficiency and security.

Warning: Working with electricity can result in injury, property damage, or even death if it is not done properly. Please keep this in mind while assisting others. If you are not sure about what you are doing, hire a licensed professional.

Rules

No abusive behaviour. This is a forum for friendly discussion; personal attacks will not be tolerated and you will be banned without warning.
Referral/affiliate links are NOT ALLOWED!
NO POLITICS! There are plenty of other communities to discuss them; this is not one.
When posting project details must be included. Posting a video or image without detail will result in a removed post and may result in a ban.
Crowdfunding links are not allowed.
Reposts, low-effort content and karma farming may be removed at the discretion of the mods. Posters may be banned without warning.

founded 11 months ago

MODERATORS

communick@selfhosted.forum

2 separate remote controls for 2 separate security cameras. Yet these remote controls interfere with one another. Do manufacturers use generic sensors in most remote controls? (alien.top)

submitted 10 months ago by DigitalFidgetal@alien.top to c/homeautomation@selfhosted.forum

4 comments fedilink hide all child comments

Let's call the 2 cameras A and B. They are not part of a "cctv system".

Yes, they are made by the same company, but they are 2 distinct units.

Yet, when you push the remote for cam A, it sometimes activates cam B. And sometimes, vice versa.

Any solutions to eliminate this type of crazy interference?
I tried searching, but wasn't able to find specific subs that discuss remote control sensors. Any suggestions for suitable subs, to discuss this issue?

you are viewing a single comment's thread
view the rest of the comments

[–] mark@infosec.pub 1 points 10 months ago

Are these IR remotes, like for a TV? Id be surprised if they have any form of channels or isolation, so if the signals are the same, i dont think you can really do anything about it.

One potential workaround would be arranging your cameras in such a way where the remotes signals can really only be picked up by one camera.

Alternatively, since this is home automation, maybe slap a tiny IR blaster in front of each cameras sensor, and program something to control eqxh separately. I think there are a bunch of programs out there that can capture and replicate IR signals