Home Automation

79 readers

2 users here now

Home automation is the residential extension of building automation.

It is automation of the home, housework or household activity.

Home automation may include centralized control of lighting, HVAC (heating, ventilation and air conditioning), appliances, security locks of gates and doors and other systems, to provide improved convenience, comfort, energy efficiency and security.

Warning: Working with electricity can result in injury, property damage, or even death if it is not done properly. Please keep this in mind while assisting others. If you are not sure about what you are doing, hire a licensed professional.

Rules

No abusive behaviour. This is a forum for friendly discussion; personal attacks will not be tolerated and you will be banned without warning.
Referral/affiliate links are NOT ALLOWED!
NO POLITICS! There are plenty of other communities to discuss them; this is not one.
When posting project details must be included. Posting a video or image without detail will result in a removed post and may result in a ban.
Crowdfunding links are not allowed.
Reposts, low-effort content and karma farming may be removed at the discretion of the mods. Posters may be banned without warning.

founded 1 year ago

MODERATORS

communick@selfhosted.forum

"Lamp" module question (alien.top)

submitted 11 months ago by Retro2Neo@alien.top to c/homeautomation@selfhosted.forum

4 comments fedilink hide all child comments

I'm looking to see if what I remember is correct and, if so, if there is a modern version of it.

Here is the background. Back when I was younger, in the 80's, my dad had his townhouse rigged up with an X.10 system complete with a little controller that you can see things on a TV. Back then there were "lamp" modules and "appliance" modules, etc.

Here is what I think I remember and what I'm looking for. For the "lamp" modules, they had a feature that if you didn't want to use the X.10 controls, you could simple turn the lamp off and back on again ( perhaps multiple times) and the "lamp" module would detect, I assume, the drop and then increase in load and turn the relay in the module on. I assume it did this by letting a trickle through that it could monitor.

If I AM remembering that correctly, anyone know of a smartplug that has a similar feature?

you are viewing a single comment's thread
view the rest of the comments

[–] ManSpeaksInMic@alien.top 1 points 11 months ago

Could you expand a little on the situation / problem you want to solve?

I concur with the others that the exact thing as asked may be a bit tricky, but there may be different solutions to your underlying problem, that don't work via flicking the lamp switch.

I'm asking this, because I find myself in a similar, but different situation. Being less about plugged-in lamps and more about my ceiling lights that I'd like to "smartify". But I can't really put smart relays in the ceiling, as they'd be rather quite difficult to access if they need maintenance. The solution for that is to install smartified wall switches, that can both act on an automation command as well as on using the physical light switch.

For ceiling lights wiring that I can access for maintenance, there exist small modules that can be put in line and act both on a normal light switch as well as a "smart" signal.

Of course none of this would be a solution for a desk lamp or uplighter. But getting an independent wireless button to use instead of the switch in the lamp cord could provide local control, at the cost of introducing an extra device instead of using the existing switch.

That kind of thinking is what leads me to ask up there: What's the underlying problem that the smart plug is intended to solve?