Home Automation

79 readers

2 users here now

Home automation is the residential extension of building automation.

It is automation of the home, housework or household activity.

Home automation may include centralized control of lighting, HVAC (heating, ventilation and air conditioning), appliances, security locks of gates and doors and other systems, to provide improved convenience, comfort, energy efficiency and security.

Warning: Working with electricity can result in injury, property damage, or even death if it is not done properly. Please keep this in mind while assisting others. If you are not sure about what you are doing, hire a licensed professional.

Rules

No abusive behaviour. This is a forum for friendly discussion; personal attacks will not be tolerated and you will be banned without warning.
Referral/affiliate links are NOT ALLOWED!
NO POLITICS! There are plenty of other communities to discuss them; this is not one.
When posting project details must be included. Posting a video or image without detail will result in a removed post and may result in a ban.
Crowdfunding links are not allowed.
Reposts, low-effort content and karma farming may be removed at the discretion of the mods. Posters may be banned without warning.

founded 11 months ago

MODERATORS

communick@selfhosted.forum

Bathroom fan (alien.top)

submitted 10 months ago by TxERTG@alien.top to c/homeautomation@selfhosted.forum

3 comments fedilink hide all child comments

in the bathroom, I have a double switch. The first activates the main light and the fan, that is, the light in the bathroom and the fan turn on at the same time, and the second activates the mirror with the LED light. The main light in the bathroom is already smart, in the sense that it is a smart wifi ceiling light, which I can control from the smart life application. The problem is that the fan is not smart, and every time I turn on the light in the bathroom, the fan automatically turns on. What I would like to automate, would be with the help of a sonoff relay connected to the fan, and a humidity sensor, to create a scenario so that the fan starts only at a certain humidity set by me, not every time when I turn on the light in the bathroom. Or would it be an option to get a smart switch?

In the case of the situation where I would use the sonoff relay and the humidity sensor, it would mean that the switch that activates the light and the fan should always be on, the fan should start only depending on the humidity, but the light would always have to be turned on/off from the application on the phone? if someone else wants to turn it on, how do they do it?

I am open to any other solution/variant. I'm still at the beginning with the smart home part and not everything is clear to me yet

you are viewing a single comment's thread
view the rest of the comments

[–] interrogumption@alien.top 1 points 10 months ago

Second the suggestion of a Shelly 2. This will give you separate power controls for the fan and smart light. Set it up so the smart light relay is always on, and set up the physical switch as a "detached switch" that doesn't operate the delay but just communicates an on/off state to your automation hub. You could, but don't need to, get a second physical switch for your fan. Home assistant to create automations with whatever humidity sensor you want to use. This is the setup I did in my bathroom, and I appreciated it when the smart bulb died because then I just threw in a normal bulb and re-enabled the normal switch function, but still had on/off smart control of the light.