this post was submitted on 07 Dec 2023
104 points (93.3% liked)

Climate - truthful information about climate, related activism and politics.

5246 readers
503 users here now

Discussion of climate, how it is changing, activism around that, the politics, and the energy systems change we need in order to stabilize things.

As a starting point, the burning of fossil fuels, and to a lesser extent deforestation and release of methane are responsible for the warming in recent decades: Graph of temperature as observed with significant warming, and simulated without added greenhouse gases and other anthropogentic changes, which shows no significant warming

How much each change to the atmosphere has warmed the world: IPCC AR6 Figure 2 - Thee bar charts: first chart: how much each gas has warmed the world. About 1C of total warming. Second chart: about 1.5C of total warming from well-mixed greenhouse gases, offset by 0.4C of cooling from aerosols and negligible influence from changes to solar output, volcanoes, and internal variability. Third chart: about 1.25C of warming from CO2, 0.5C from methane, and a bunch more in small quantities from other gases. About 0.5C of cooling with large error bars from SO2.

Recommended actions to cut greenhouse gas emissions in the near future:

Anti-science, inactivism, and unsupported conspiracy theories are not ok here.

founded 1 year ago
MODERATORS
silence7@slrpnk.net
104
Most Americans want to electrify their homes — if they can keep their gas stoves (grist.org)
submitted 11 months ago by RvTV95XBeo@sh.itjust.works to c/climate@slrpnk.net
154 comments fedilink hide all child comments
you are viewing a single comment's thread
view the rest of the comments
[–] ProdigalFrog@slrpnk.net 12 points 11 months ago (3 children)

AFIAK they also work with cast iron cookware.

[–] Anticorp@lemmy.world 5 points 11 months ago (2 children)

Any ferrous metal. Right? So anything except stainless steel. I'm guessing you probably want something fairly thick too.

[–] Hyperreality@kbin.social 4 points 11 months ago

Stainless often works too IME.

[–] Gnugit@aussie.zone 4 points 11 months ago (1 children)

Yes, very thick otherwise you get a burn spot everytime around the middle.

Also, my stainless pan works fine on my induction stove.

[–] Anticorp@lemmy.world 1 points 11 months ago (2 children)

Does it have a fused base of other metals?

[–] Gnugit@aussie.zone 1 points 11 months ago

That may be it, I'm not sure I bought it at a thrift store.

[–] Gnugit@aussie.zone 1 points 11 months ago

Yes, aluminium "Sleek Seamless Impact Bonded Sandwich Base with Aluminium Core"

https://scanpan.com.au/fry-pan-32cm-x-6cm/

[–] gullible@kbin.social 4 points 11 months ago (1 children)

Enamel and aluminum are the only ones I’ve had issues with, personally.

[–] BrowseMan@sh.itjust.works 3 points 11 months ago

What they do now is "sanwchich" with a disc of induction-compatible metal inserted in the bottom of the cookware.

Allows compatibility (and better heat spread I think)

[–] BrowseMan@sh.itjust.works 4 points 11 months ago* (last edited 11 months ago)

From experience, they work as long as a magnet can stick to it, so yes flany ferrous metal should work.

Induction is the best cooking method to me. Faster and safer than electric and gas, (much) easier to control than electric...

Ah and so much easier to clean than gas!

Only gas advantage I could see is maybe heat "fine tuning". And even this probably depend on the system (the one I used had roughly 6 heating level, but there is system with more). And is not very important except if you're a high level chef.