this post was submitted on 27 Dec 2023
35 points (94.9% liked)
Linux
48143 readers
773 users here now
From Wikipedia, the free encyclopedia
Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).
Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.
Rules
- Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
- No misinformation
- No NSFW content
- No hate speech, bigotry, etc
Related Communities
Community icon by Alpár-Etele Méder, licensed under CC BY 3.0
founded 5 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Would recommend using an external camera to be honest.
There is a ton of software needed to get the most out of a camera, and from the little I understand about embedded image processing a lot of it happens inside proprietary blobs. You can get the image directly as an alternative, but it will look like garbage without reprocessing the input (preferably inside an open source component, with the downside of sometimes being unable to use the hardware to accelerate this)
Right now if you wanted a high quality, mostly open source Linux device with a camera, IMO you'd be looking at the Raspberry Pi, and there is still a ton of work to do. The work being done there, as well as Libcamera, the V4L2 replacement for MIPI/CSI cameras, should eventually make its way into Linux phones - but no idea when that will happen
I thought about tethering. I've played with tethering in the past for astrophotography which is working alright.
I don't want to mount the sensor directly to the computer - that's impossible for a camera noob like me.