Electric Vehicles

3219 readers

206 users here now

A community for the sharing of links, news, and discussion related to Electric Vehicles.

Rules

No bigotry - including racism, sexism, ableism, casteism, speciesism, homophobia, transphobia, or xenophobia.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No self-promotion
No irrelevant content. All posts must be relevant and related to plug-in electric vehicles — BEVs or PHEVs.
No trolling
Policy, not politics. Submissions and comments about effective policymaking are allowed and encouraged in the community, however conversations and submissions about parties, politicians, and those devolving into general tribalism will be removed.

founded 1 year ago

MODERATORS

Sunshine@lemmy.ca

J3400 to J1772 adapter + DCFC = ??? (sh.itjust.works)

submitted 8 months ago by p1mrx@sh.itjust.works to c/evs@lemmy.world

6 comments fedilink hide all child comments

I have one of these J3400 to J1772 adapters so I can connect my Hyundai to a Tesla destination charger. They'll probably get more popular as J3400 becomes the primary standard:

I'm curious what would actually happen if someone were to use such an adapter with a J3400 DC fast charger. I know it can't possibly work because the DC charging pins are connected to the vehicle's AC pins, but is there something in the J3400 standard to notice and reject such an adapter before DC voltage is applied?

I'm not sure if J1772 vs. CCS1 adapters contain anything that the signalling protocol could use to identify which is which. If the DC charger were required to passively measure the battery voltage before sending any power, that would probably avoid the "magic smoke" problem, but does the standard guarantee that this will happen?

you are viewing a single comment's thread
view the rest of the comments

[–] p1mrx@sh.itjust.works 1 points 8 months ago

if the upcoming adapters will support a NACS plug on an AC or DC circuit

The NACS to CCS1 adapters I've seen are DC only. An AC/DC adapter would somehow need to detect what kind of charger is connected and switch to the correct pins. Relays capable of switching 500+ amps are $$$.

it uses a much different protocol to communicate with the car so it wouldn’t initiate power if it’s not made for it

You say "it wouldn't initiate power", but how does the DC charger know if you're using an AC adapter?