Hey Lemmy, I need some recommendations for a CPU-intensive slightly mobile rig. I run a lot of engineering simulations and I need a computer that I can move between my home and work on a semi-frequent basis. I'm looking for something more powerful than a laptop and I'll have monitors/peripherals at both locations. Maybe a mini-ITX in an HTPC style case? The sims don't really make use of GPU, so integrated graphics is just fine. They multi-thread a bit, but there are still single-core bottlenecks in the process, so highest single-core performance is probably pretty important. It's also got to handle 128GB of DDR5 and a M.2 PCIe NVMe SSD.
A lot of the faster CPUs seem to need some serious cooling (100W+ TDP!) and I'd rather not have a jet engine roaring constantly since this thing will be sitting right on the desk next to me eating 100% CPU most of the time. Are there small form factor cases that can support water cooling? When Intel says a CPU has a processor base power of 125W, but a Max Turbo Power of 253W, does that imply that the 253W can't be sustained even with enough cooling?
In passmark intel does indeed beat AMD (albeit at almost twice the needed power), but it's not so clear in other benchmarks, see for example : here or here.
Ultimately, it seems Intel 13900K or 14900K would probably give you a slight advantage, maybe about 5%, but that's only if you can cool it well enough that it doesn't have to throttle to prevent overheating, which might happen really fast if you want to put it in a case that would allow you to cary it around. The heat these cpus dissipate means that if you intend to run them at full throttle for long periods of time, you probably have to use a 360mm or 420 mm watercooling, or 2x240 mm but then you have to build your own loop. That won't fit in most SFF cases.
Great point, it's not so clear cut of a lead. 14900K wins in price, but I haven't factored in the cost of the mobo that might even out the total cost.
A case like Silverstone Alta G1M would let me fit a 360mm water cooler in there, but the build is starting to get larger and larger :P A lower TDP would need smaller coolers and fit smaller cases like you said.
I can fabricate a handle for it, and I'm considering perhaps smaller cases that I could stuff a 360mm cooler into where a GPU would be. e.g. Mechanic Master C30pro (aside from the glass...). As long as the case can handle a long enough GPU, it would fit a 360mm radiator (~400mm long) and I could bolt it to the side panel and cut some ventilation. Sadly many of the cases out there seem to be tempered glass side panels... can't cut/drill that!