this post was submitted on 12 Apr 2024
20 points (91.7% liked)

Linux

48069 readers
1025 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 5 years ago
MODERATORS
nooter692@lemmy.ml
AgreeableLandscape@lemmy.ml
MarcellusDrum@lemmy.ml
cypherpunks@lemmy.ml
cyclohexane@lemmy.ml
d3Xt3r@lemmy.nz
20
Help with HDD (lemmy.ml)
submitted 7 months ago* (last edited 7 months ago) by gary_host_laptop@lemmy.ml to c/linux@lemmy.ml
27 comments fedilink hide all child comments
 

I have a 4TB HDD that I use to store music, films, images, and text files. I have a 250GB SDD that I use to install my OS and video games. So far I didn't have any problem with this setup, obviously it's a bit slower when it reads the HDD but nothing too serious, but lately it's gotten way worse, where it just lags too much when I try to access files on that disk, and specially when it comes to listening to music, it's super annoying. I'm using Elisa music player and it just takes ages to load the albums.

Below is my system and HDD information. I think I'm supposed to use hardlinks or something to access those files, could that be a reason? I've never even fully filled my HDD and it's only 3 years old.

System Details Report

Report details

Hardware Information:

  • Hardware Model: ASUSTeK COMPUTER INC. PRIME A320M-K
  • Memory: 16.0 GiB
  • Processor: AMD Ryzen™ 5 5600G with Radeon™ Graphics × 12
  • Graphics: AMD Radeon™ Graphics
  • Disk Capacity: 4.2 TB

Software Information:

  • Firmware Version: 6042
  • OS Name: Fedora Linux 39 (Workstation Edition)
  • OS Build: (null)
  • OS Type: 64-bit
  • GNOME Version: 45.5
  • Windowing System: Wayland
  • Kernel Version: Linux 6.7.11-200.fc39.x86_64

you are viewing a single comment's thread
view the rest of the comments
[–] gary_host_laptop@lemmy.ml 2 points 6 months ago (1 children)

It's a bit long but here it is.

smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.7.11-200.fc39.x86_64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Toshiba X300
Device Model:     TOSHIBA HDWE140
Serial Number:    41IUK67JFBRG
LU WWN Device Id: 5 000039 abc58066c
Firmware Version: FP1R
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database 7.3/5528
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is:    Sat Apr 13 17:09:03 2024 -03
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  120) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 481) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   050    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0027   100   100   001    Pre-fail  Always       -       464
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       11263
  5 Reallocated_Sector_Ct   0x0033   100   100   050    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   050    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   050    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0032   073   073   000    Old_age   Always       -       11051
 10 Spin_Retry_Count        0x0033   253   100   030    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       11259
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       8
192 Power-Off_Retract_Count 0x0032   083   083   000    Old_age   Always       -       8637
193 Load_Cycle_Count        0x0032   099   099   000    Old_age   Always       -       11332
194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       38 (Min/Max 16/59)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   253   000    Old_age   Always       -       0
220 Disk_Shift              0x0002   100   100   000    Old_age   Always       -       0
222 Loaded_Hours            0x0032   073   073   000    Old_age   Always       -       11003
223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
224 Load_Friction           0x0022   100   100   000    Old_age   Always       -       0
226 Load-in_Time            0x0026   100   100   000    Old_age   Always       -       545
240 Head_Flying_Hours       0x0001   100   100   001    Pre-fail  Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

The above only provides legacy SMART information - try 'smartctl -x' for more
[–] bizdelnick@lemmy.ml 2 points 6 months ago (1 children)

Everything seems ok. It is unlikely that the disk itself is dying. Maybe the problem is a bad cable or bus controller. Or something is wrong with the filesystem.

[–] gary_host_laptop@lemmy.ml 2 points 6 months ago

Hey, I replaced the cable and everything seems to be working fine, thank you!