I just moved into a student dorm for a semester abroad, and beforehand I emailed them asking whether they had ethernet ports to plug my router into (I use it to connect all my devices, and for WiVRn VR streaming). They confirmed that I could, but now that I'm here the wifi login portal is asking me to accept these terms from the ISP, which forbid plugging in a router. There's another clause that forbids "Disruptive Devices" entirely, defined as:
“Disruptive Device” means any device that prevents or interferes with our provision of the 4Wireless to other customers (such as a wireless access point such as wireless routers) or any other device used by you in breach of the Acceptable Use Policy;
So what are my options? I don't think I can use this service without accepting the terms, but also I was told by the student dorm support that I could bring a router, which contradicts this.
EDIT: some additional context:
- dorm provider is a company separate from my uni (they have an agreement but that's it)
- ISP (ask4) is totally separate from dorm provider, and have installed a mesh network that requires an account. On account creation, there are many upsells including one for connecting more than one device. The "free" plan only allows me to sign in on a single device, and I can upgrade to two devices for 15 pounds.
- ethernet requires login too
- VR streaming requires a high performance wifi 6 network, which is why I bought this router (Archer C6 from tp-link)
Rf interference. Similar to having multiple microwaves running near your router, or those old rf based baby monitors.
Congested the 2.4 or 5gz spectrum with noise causing noise and retransmits or outright stopping the wifi from working.
If you have an old radio that does AM find a AM channel that isn’t broadcasting and bring it near your router. You can actually “hear” the noise those things are putting out.
Happily the 2.4Ghz and 5Ghz bands are unlicensed and open for public use.
Nothing our OP said indicated they wanted to run WiFi, but even if they did, they could choose a less noisy channel.
Nothing in the click through agreement talked about radios, or bands.
Any body could turn their phone into a cellular hotspot, or have a starlink hotspot, and that is nobody elses business. This is no different.
Letting the network dictate what you can run in your own home is MaBell levels of authoritarianism, but more to the point, its unenforceable ( You can always take a page out of how to hotspot book - Router runs a always on vpn and the lan side only goes out over the VPN, so DPI just seeds the router, and the TTL is as expected)
But this is a dorm. A shared environment with close proximity.
If everyone had their own Wi-Fi transmitting at normal power there would be too much interference that even channel hopping wouldn’t fix it.
Not to say that there can’t be some middle ground but the Wild West attitude isn’t kosher either.
OP already mentioned that the student WiFi is being run entirely by a third party ISP and they have more expensive paid plans for more than one device.
Guaranteed this isn't about running an optimal network (Though I'm sure if pressed about it they'll start spouting excuses similar to yours) and all about company greed and constant profit growth.
Probably. But I didn’t want them dealing with being cut off. They can do what they want but since it’s a dorm you can be sure they’ve had these conversations before
Yeah I definitely don't want to hurt the network for other folks staying at this (very large) dorm complex/building. Can I reasonably run it at low power (since I only need it in my room) and not have it bother anyone?
Yes, this is one of those things that as long as you do it properly and don't interfere with anything nothing will happen
Reduce power to minimal levels, choose a band far away from the WiFi in your area (There are a number of WiFi scanning apps on the app stores) and ensure you plug in the Ethernet from the wall into the WAN port on the router so your router can handle DHCP without interfering with University DHCP networking (though it might make getting through the captive portal tricky)
Do a frequency scan, choose a 5ghz band, narrowest band you can, that isn't being used, (don't use 2.4ghz, 5ghz attenuates the fastest). If your router supports DFS, use a DFS channel
Depends on whether you can adjust the Tx level but then you run into FCC level stuff that most people avoid (since boosting it is a huge issue with interference)
I'm in the UK, not sure if they have their own british version of the FCC or just follow their rules but it might be different. The router/AP is a tp link Archer C6, which I use as it is performant enough to do VR streaming w/o stutters or high latency.
This is for the A7 but may show you how to turn off wifi on yours if the UI is the same
https://community.tp-link.com/us/home/forum/topic/560824
Thanks. I do unfortunately need wifi to do wireless VR streaming... I guess I need to find a way to tune it to interfere the least, but this is a whole alien world to me.
Looks like that model allows you to go down to 50% (Options are Low/50, medium/75 and full)
But looks like your router might be supported by openwrt, if you can get that working you can set the power as low as you want
https://openwrt.org/toh/tp-link/archer_c6_v2
ok.... so our friendly OP can use their router without turning on the radios and everyone is happy? let's advise that then