this post was submitted on 24 Sep 2024
37 points (100.0% liked)

Ask Electronics

3313 readers
18 users here now

For questions about component-level electronic circuits, tools and equipment.

Rules

1: Be nice.

2: Be on-topic (eg: Electronic, not electrical).

3: No commercial stuff, buying, selling or valuations.

4: Be safe.

founded 1 year ago
MODERATORS
DavideAndrea@discuss.tchncs.de
linker3000@discuss.tchncs.de
37
What's a good method for a non-technical person to short the terminals of two 0402 resistors ~1mm apart? (lemmy.world)
submitted 1 month ago by ch00f@lemmy.world to c/askelectronics@discuss.tchncs.de
27 comments fedilink hide all child comments
 

I'm working on a mod kit for a popular item, but my target audience isn't likely to have a soldering iron. The majority of the project connects to an exposed ribbon connector, but I need to short two terminals to force a power supply on.

Any ideas on a method I could provide for people who can't solder? Maybe a strip of copper tape?

you are viewing a single comment's thread
view the rest of the comments
[–] Fosheze@lemmy.world 2 points 1 month ago

Solder is really the only good method. With tape, the adhesive is going to give you really poor contact. With anything else you're going to struggle to keep whatever you are using to short those pads in place.