Linux

48222 readers

814 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
No misinformation
No NSFW content
No hate speech, bigotry, etc

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 5 years ago

MODERATORS

nooter692@lemmy.ml

AgreeableLandscape@lemmy.ml

MarcellusDrum@lemmy.ml

cypherpunks@lemmy.ml

cyclohexane@lemmy.ml

d3Xt3r@lemmy.nz

Best way to swap drives? (lemmy.world)

submitted 1 week ago by Nednarb44@lemmy.world to c/linux@lemmy.ml

22 comments fedilink hide all child comments

I'm looking to upgrade drives on two of my machines. My server running ubuntu has a 3.5" and will be getting a larger capacity HDD, while my personal computer running endeavor OS will be going from a 2.5" ssd to an nvme drive. (Not sure if it helps giving the drive types, but can't hurt).

I'm fine with a clean install and reinstalling everything, but to save some time I'd of course like to minimize the effort that goes into it (importing settings etc). Any tips/tricks for either? Thanks in advance

you are viewing a single comment's thread
view the rest of the comments

[–] Nednarb44@lemmy.world 3 points 1 week ago (5 children)

Any help with the acronyms? I'm still pretty new to Linux

[–] schizo@forum.uncomfortable.business 4 points 1 week ago (4 children)

two commands: dd and resize2fs, assuming you're using ext4 and not something more exotic.

one makes a block-level copy of one device to another like so: dd if=/dev/source-drive of=/dev/destination-drive

the other is used to resize the filesystem from whatever size it was, to whatever size you tell it (or the whole disk; I'd have to go read a manpage since it's been a bit)

the dd is completely safe, but the resize2fs command can break things, but you'd still have the data on the original drive, so you could always start over if it does - i'd unplug the source drive before you start doing any expansion stuff.

[–] Nednarb44@lemmy.world 1 points 1 week ago (2 children)

Thanks, that's really helpful. It can be hard to tell between commands and acronyms in conversation with familiarity

[–] cmnybo@discuss.tchncs.de 2 points 1 week ago (1 children)

Be absolutely sure that you get the source and destination drives correct. If you get them backwards, it will nuke your data. There is no confirmations, dd will start as soon as you press enter.

[–] muhyb@programming.dev 1 points 1 week ago

Good old disk destroyer.

load more comments (1 replies)