this post was submitted on 24 Nov 2024
1514 points (92.4% liked)

Technology

60112 readers
2512 users here now

This is a most excellent place for technology news and articles.


Our Rules


  1. Follow the lemmy.world rules.
  2. Only tech related content.
  3. Be excellent to each another!
  4. Mod approved content bots can post up to 10 articles per day.
  5. Threads asking for personal tech support may be deleted.
  6. Politics threads may be removed.
  7. No memes allowed as posts, OK to post as comments.
  8. Only approved bots from the list below, to ask if your bot can be added please contact us.
  9. Check for duplicates before posting, duplicates may be removed

Approved Bots


founded 2 years ago
MODERATORS
 
you are viewing a single comment's thread
view the rest of the comments
[–] disguy_ovahea@lemmy.world 1 points 1 month ago (1 children)

Tell me where there’s room to add another bus and ports without expanding the footprint.

https://www.macrumors.com/2024/11/22/ifixit-shares-m4-macbook-pro-teardown/

Thunderbolt 4 still has twice the bandwidth of the fastest USB-C standard currently available at 40 Gb/s. Thunderbolt 5 tops out at 120 Gb/s. That means you could have six USB-C devices, running max throughput of 20 Gb/s through a dock, connected to the Mac using Thunderbolt 5, without limiting the bandwidth. It also daisy chains more 4K displays at a higher refresh rate than USB-C. It’s a far superior connection.

[–] potustheplant@feddit.nl 1 points 1 month ago (1 children)

There is a lot of empty PCB in that design. They could at the very least add 1 more port on each side if they wanted to. The audio solution is also taking up quite a bit of space.

Agai with the TB5. Those hubs cost $200+ and some even require external power. It's a good option to have. It's bad if it's your only option.

[–] disguy_ovahea@lemmy.world 1 points 1 month ago* (last edited 1 month ago) (1 children)

Empty PCB? You can’t see the other side of the logic board in this video. All reputable computer manufacturers use circus design on PCBs.

The cost of the dock is high because the tech is new. I don’t believe I need to explain the cost curve of advancing technology to you.

[–] potustheplant@feddit.nl 1 points 1 month ago

You don't need to explain why it's expensive but you do need to explain why it's suddenly necessary instead lf an option.