3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
I see their kit, very cool. I'm alright if I have to solder. My neighbor can help out, they have a complete workbench setup for electronics and I believe they even have the crimpers I would need.
I'm going to go for the 350mm bed. I'm tired of being limited on the build plate of the Vyper. Are there any suggestions for bumping up the base kit? I see there are a lot of options for this kit.
I replied to another post with a list of mods, so take a look at the other comments in the post for some out of box mods.
As a 350 owner, be aware of two things.
First, big bed = big chamber = heat soak takes a while and you have a lot more surface area to lose heat from. If you want to print big ABS/ASA parts you're going to want ACM panels, a better sealed/insulated front door, and potentially a radiant layer inside the printer.
Second, the big printer limits your rate of acceleration some compared to a smaller CoreXY. IMO if you have a big printer to print big things you're probably not going to have small/finely detailed parts that often. Those are the kinds of parts that will go a touch slower. But honestly 5k acceleration is orders of magnitude faster than most bed slingers can achieve and 10-15k is only a 2-3x increase so you're not giving up that much.
Other than than, no regrets about the 350.