this post was submitted on 18 Aug 2025
66 points (94.6% liked)

Videos

17217 readers
465 users here now

For sharing interesting videos from around the Web!

Rules

  1. Videos only (aside from meta posts flagged with [META])
  2. Follow the global Mastodon.World rules and the Lemmy.World TOS while posting and commenting.
  3. Don't be a jerk
  4. No advertising
  5. No political videos, post those to !politicalvideos@lemmy.world instead.
  6. Avoid clickbait titles. (Tip: Use dearrow)
  7. Link directly to the video source and not for example an embedded video in an article or tracked sharing link.
  8. Duplicate posts may be removed
  9. AI generated content must be tagged with "[AI] …" ^Discussion^

Note: bans may apply to both !videos@lemmy.world and !politicalvideos@lemmy.world

founded 2 years ago
MODERATORS
Flutter@lemmy.world
Ghostalmedia@lemmy.world
can@sh.itjust.works
qaz@lemmy.world
qaz@lemmy.blahaj.zone
qaz@sh.itjust.works
66
USB-C extensions are not allowed for a reason (www.youtube.com)
submitted 4 months ago by Chozo@fedia.io to c/videos@lemmy.world
23 comments fedilink hide all child comments
 

This popped up randomly in my feed today, and I found it to be pretty interesting and informative.

tl;dw: All USB-C cables have a microchip inside them which runs a small bit of software that tells the devices its plugged into exactly what they're capable of, such as their power rating and transfer speeds. When you plug the cable into your device, it reads the data from this chip, which then dictates how much data/power it is allowed to transmit along the cable.

The problem is that when you use a USB-C extension cable, the device you're plugging into can only see the chip data from the first cable; the cables beyond that first one are completely invisible to your device. And if your first cable is rated for 200 watts, and your extension is only rated for 100 watts, your device will still send 200 watts down the line, without ever realizing that it's overloading the extension cable and creating a possible fire hazard.

you are viewing a single comment's thread
view the rest of the comments
[–] billwashere@lemmy.world 38 points 4 months ago

No, all USB-C cables do not have hardware to negotiate power (voltage and current). USB-C is simply a connector type like USB-A and USB-B. What you’re referring to is called USB-PD. This is when the charger and device “handshake” to agree on the optimal voltage and current, then adjust dynamically as needed. Yes extensions can be a problem for things like laptops or anything that can draw large current over high voltage. It’s really not any different than trying to run a table saw over a cheap extension cord meant for a lamp or a set of Christmas lights. If you’re using one of the usb extension cables to charge your phone, it’s fine.