Home Automation

79 readers

2 users here now

Home automation is the residential extension of building automation.

It is automation of the home, housework or household activity.

Home automation may include centralized control of lighting, HVAC (heating, ventilation and air conditioning), appliances, security locks of gates and doors and other systems, to provide improved convenience, comfort, energy efficiency and security.

Warning: Working with electricity can result in injury, property damage, or even death if it is not done properly. Please keep this in mind while assisting others. If you are not sure about what you are doing, hire a licensed professional.

Rules

No abusive behaviour. This is a forum for friendly discussion; personal attacks will not be tolerated and you will be banned without warning.
Referral/affiliate links are NOT ALLOWED!
NO POLITICS! There are plenty of other communities to discuss them; this is not one.
When posting project details must be included. Posting a video or image without detail will result in a removed post and may result in a ban.
Crowdfunding links are not allowed.
Reposts, low-effort content and karma farming may be removed at the discretion of the mods. Posters may be banned without warning.

founded 1 year ago

MODERATORS

communick@selfhosted.forum

Mitsubishi mini-splits: which WiFi smart controller can see or “know” when units are on or off? Cielo doesn’t seem to, and the on-off toggle fails. (alien.top)

submitted 1 year ago by PsychologicalGold734@alien.top to c/homeautomation@selfhosted.forum

18 comments fedilink hide all child comments

As best as I can tell, Sensibo and Cielo do not know the current state of your mini-splits.

If you have a schedule to set the units on/off and someone in your house inadvertently uses the remote to toggle the on/off state, all your subsequent schedule triggers will be off — for instance an “off” action you create in the Cielo app will turn ON a mini-split that’s already off, because it’s only a basic, binary toggle.

Obviously this is annoying, so I’ve been researching for controls that are smarter. I have no experience with Kumo but I think I’d switch if I knew it had this functionality. Does anyone have any recommendations?

you are viewing a single comment's thread
view the rest of the comments

[–] The_Marine_Biologist@alien.top 1 points 1 year ago (1 children)

You might also need to add the additional fan speed options. My testing showed I was missing "diffuse" and "middle". You can figure it out by seeing what the esp logs show when you set the fan speed of the remote to each level.

You could try doing the same with the horizontal vane, I haven't tested that yet.

[–] kividk@alien.top 1 points 1 year ago

I hadn't tried checking the logs while using the remote. Thanks for the suggestion. Unfortunately, when I press "Wide Vane" on my remote, I don't get an update in the logs about it. I do see updates when I change the mode or fan speed, as well as the vertical swing setting.