homeassistant

16538 readers

77 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world

Whats everyone using for smart plugs? (lemmy.world)

submitted 2 weeks ago* (last edited 2 weeks ago) by firepenny@lemmy.world to c/homeassistant@lemmy.world

59 comments fedilink hide all child comments

Been using tp-link smart plugs for a moment. Not really had any problems with them but i want to move to something such as z-wave or a ZigBee. Something that is totally local and does not require a different app on my phone.

you are viewing a single comment's thread
view the rest of the comments

[–] avidamoeba@lemmy.ca 1 points 2 weeks ago (1 children)

As far as I know the switch stops connecting or disconnecting. But besidss that I don't know what the failure mode of a worn relay looks like. E.g. whether it could overheat and melt due to a poor connection because of worn contacts. You should read more on that.

[–] shortwavesurfer@lemmy.zip 2 points 2 weeks ago

Okay, that's good to know. If it's just that the switch doesn't disconnect or connect, that's fine, because even if it fails in a connected state, the air conditioner itself only pulls about 5 amps while running, and the plug itself is rated for 15 amps.

It only pulls anywhere close to that when it's very first starting up and only for a brief moment.