this post was submitted on 30 Oct 2023
3 points (55.2% liked)

Programming

17378 readers
696 users here now

Welcome to the main community in programming.dev! Feel free to post anything relating to programming here!

Cross posting is strongly encouraged in the instance. If you feel your post or another person's post makes sense in another community cross post into it.

Hope you enjoy the instance!

Rules

Rules

  • Follow the programming.dev instance rules
  • Keep content related to programming in some way
  • If you're posting long videos try to add in some form of tldr for those who don't want to watch videos

Wormhole

Follow the wormhole through a path of communities !webdev@programming.dev

founded 1 year ago
MODERATORS
snowe@programming.dev
Ategon@programming.dev
MaungaHikoi@lemmy.nz
3
[WireGuard] Do I have to use my own DNS on a VPS in order to avoid DNS-leaks? (lemmy.world)
submitted 1 year ago* (last edited 1 year ago) by salvador@lemmy.world to c/programming@programming.dev
23 comments fedilink hide all child comments
 

I connect to a WireGuard installed on my VPS. Then I go to a random VPN service marketing page on which I'll discover that my DNS leaks. And which is correct because I've specified DNS = 1.1.1.1 in [Interface] for all the Peers.

In order to avoid DNS leakadge, do I have to a) run DNS server on the a VPS -- along with WireGuard, and b) use this one and only it, instead of 1.1.1.1?

But if so, how will this possibly work?

[Peer]
PublicKey = [....;....]
PresharedKey = [......]
Endpoint = wg.my_domain123.com:51820

In order to resolve Endpoint of my VPS to begin with, other DNS server will have to be used -- by IP. But there'll be none because I'll use a DNS on my VPS instead of 1.1.1.1. In other words, it'll be a circular dependency.

you are viewing a single comment's thread
view the rest of the comments
[–] salvador@lemmy.world -4 points 1 year ago* (last edited 1 year ago) (1 children)

It’s not completely clear what you mean, but I’m guessing you’re only routing a subset of your traffic through wireguard, probably only IPv4, and there may be some IPv6 traffic that is not being routed over your wireguard connection.

Why would you guess that?

You can specify any IPs you want for DNS with wireguard, and if your allowed IPs include those addresses, then it should flow over your VPN.

I do this with Pihole at home, and it blocks ads while I’m away.

How's that relevant to my question?

[–] atheken@programming.dev 1 points 1 year ago* (last edited 1 year ago)

Your question, as best as I could tell, is that you want DNS traffic to exit through your VPS node, rather than your client machine.

I posited one reason this could be happening, and additionally, a similar setup that provably routes traffic through the VPN based on the method I described.

Nobody in here is obligated to help you, I gave you a couple threads to pull on to resolve your question, so maybe consider accepting it graciously, rather than being obstinate.