this post was submitted on 17 Nov 2025
19 points (100.0% liked)

Ask Electronics

3960 readers
64 users here now

For questions about component-level electronic circuits, tools and equipment.

Rules

1: Be nice.

2: Be on-topic (eg: Electronic, not electrical).

3: No commercial stuff, buying, selling or valuations.

4: Be safe.

founded 2 years ago
MODERATORS
DavideAndrea@discuss.tchncs.de
linker3000@discuss.tchncs.de
19
Building a USB-C DAC in as small a package as possible (lemmy.world)
submitted 1 month ago* (last edited 1 month ago) by northernscrub@lemmy.world to c/askelectronics@discuss.tchncs.de
10 comments fedilink hide all child comments
 

Given the endless problems with attempting to properly initialise ALSA with the qualcomm chipset in my device, I've resorted to the idea that I'll be designing a larger case, with a larger screen (and hopefully no shitty curvy corners) and an integrated DAC with probably a small headphone amplifier.

Ideally, I would like this to be addressable, and have the facility to run an equaliser on-board that can be configured via the USB connection, although I'll settle for bluetooth if the former is too complicated. It will also need to fit inside the phone housing (which will likely be around 9-10mm). I plan on an aluminium frame, so heatsink facilities should be easily manageable. The USB connection will, of course, need to be a passthrough connection to facilitate charging the phone - having a separate USB-C socket on the board is fine, I can probably adjust for this.

Am I setting my aspirations too high, or are there components available that meet these specifications?

you are viewing a single comment's thread
view the rest of the comments
[–] northernscrub@lemmy.world 4 points 1 month ago

I've looked at these, but they lack the integrated amplifier (afaik) and the configurable equaliser. Those are two super important features that pretty much break the idea for me.