this post was submitted on 20 Nov 2025
15 points (100.0% liked)

homeassistant

17419 readers
47 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago
MODERATORS
GreatAlbatross@feddit.uk
greatalbatross@lemmy.world
15
Should I get a ZBT-2? (lemmy.ca)
submitted 1 month ago by GreatBlueHeron@lemmy.ca to c/homeassistant@lemmy.world
3 comments fedilink hide all child comments
 

I've been running Home Assistant for a while and have wifi, zwave and zigbee networks. My zigbee is on a ZBT-1. I was happy until this week.

I bought some ESP32-C6 development boards to learn about ESP32 etc. with the goal of making some zigbee lock sensors (mechanical switch to report if a deadbolt is closed).

When I put the sample zigbee code on the board it won't connect to the network from my study, but if I take it closer to the coordinator it will connect and it continues working if I take it back to my study. The desk in my study is only about 16' from the coordinator but it is through 3 wood framed, gyprock lined, walls.

I know the answer is "probably, maybe", but I'd be interested in any insight people have about optimizing Zigbee networks. I could remove one of the walls from the equation by using a longer USB cable and bringing the ZBT-1 out of the utility closet? I already have routers close to 2 of the 3 doors I want to put my sensors in - I could maybe add a Zigbee lamp near the 3rd location?

you are viewing a single comment's thread
view the rest of the comments
[–] besmtt@lemmy.world 4 points 1 month ago

I don't have a whole lot of experience with zigbee, so take my experience with some salt, but I'm really liking the SMLIGHT SLZB-MR1. I have it setup with PoE and I've got it a room away from my Z-wave antenna. I especially like that it's separate from my server that runs HAOS and Z-wave JS UI, so a server reboot or HAOS update doesn't really affect it. I only have one zigbee device, but it's worked flawlessly so far.