this post was submitted on 12 Mar 2026
45 points (100.0% liked)

Linux Gaming

25505 readers
18 users here now

Discussions and news about gaming on the GNU/Linux family of operating systems (including the Steam Deck). Potentially a $HOME away from home for disgruntled /r/linux_gaming denizens of the redditarian demesne.

This page can be subscribed to via RSS.

Original /r/linux_gaming pengwing by uoou.

No memes/shitposts/low-effort posts, please.

Resources

Help:

Launchers/Game Library Managers:

General:

Discord:

IRC:

Matrix:

Telegram:

founded 2 years ago
MODERATORS
monolalia@lemmy.world
45
Solved Problem with DualSense bluetooth connection (feddit.org)
submitted 1 month ago by HumbleExaggeration@feddit.org to c/linux_gaming@lemmy.world
4 comments fedilink hide all child comments
 

Today I spent a while to fix a problem with my DualSense controller that really annoyed me for a while now, but I never found the time to fix. (disclaimer: summary was created by AI)

After restarting my openSUSE system, my DualSense controller would connect via Bluetooth but wasn’t recognized as a gamepad. It only worked after unplugging and replugging the Bluetooth dongle (ASUS USB-BT500).

Cause: The Bluetooth dongle wasn’t initializing correctly after a reboot. While the controller could establish a Bluetooth connection, it wasn’t registering as an input device (/dev/input/by-id/). Only after manually resetting the dongle (by unplugging and replugging it) would the connection stabilize.

Solution: I created a udev rule to automatically reset the dongle after every reboot, ensuring proper initialization. This fixed the issue, and the controller is now reliably detected.

The udev rule:

ACTION=="add", SUBSYSTEM=="usb", ATTRS{idVendor}=="0b05", ATTRS{idProduct}=="190e", RUN+="/usr/bin/hciconfig hci1 reset"

(Replace 0b05:190e with your dongle’s ID from lsusb.)

After creating the rule with sudo nano /etc/udev/rules.d/99-bt-dongle-reset.rules and reloading udev (sudo udevadm control --reload-rules && sudo udevadm trigger), the controller now works immediately after boot.

Maybe this is helpful for somebody facing a similar issue. Or you can tell me, why this solution is a bad idea and why I should not listen to AI.

you are viewing a single comment's thread
view the rest of the comments
[–] domi@lemmy.secnd.me 1 points 1 month ago

I installed them through a Windows VM, not sure if they have different firmware for PS5 and PC.

I had a similar issue to yours where the controller would not connect or connect and not register as input. It worked fine for me after the update.

Only problem was that I needed to unplug and plug in the Bluetooth dongle everytime I restarted the PC, for the controller to connect correctly.

Do you have problems with other Bluetooth devices until you re-plug your adapter?