Home Automation

79 readers

2 users here now

Home automation is the residential extension of building automation.

It is automation of the home, housework or household activity.

Home automation may include centralized control of lighting, HVAC (heating, ventilation and air conditioning), appliances, security locks of gates and doors and other systems, to provide improved convenience, comfort, energy efficiency and security.

Warning: Working with electricity can result in injury, property damage, or even death if it is not done properly. Please keep this in mind while assisting others. If you are not sure about what you are doing, hire a licensed professional.

Rules

No abusive behaviour. This is a forum for friendly discussion; personal attacks will not be tolerated and you will be banned without warning.
Referral/affiliate links are NOT ALLOWED!
NO POLITICS! There are plenty of other communities to discuss them; this is not one.
When posting project details must be included. Posting a video or image without detail will result in a removed post and may result in a ban.
Crowdfunding links are not allowed.
Reposts, low-effort content and karma farming may be removed at the discretion of the mods. Posters may be banned without warning.

founded 1 year ago

MODERATORS

communick@selfhosted.forum

Need something along the lines of a Shelly 1 Plus that can be in 140F temperatures (alien.top)

submitted 11 months ago by bwyer@alien.top to c/homeautomation@selfhosted.forum

7 comments fedilink hide all child comments

Title says it all. Shelly devices are only rated up to 105F, and I need to control an outlet in my attic (it powers a hot water recirculation pump). It needs to work with an inductive load since it's powering a motor.

Any suggestions? It can be Z-Wave, Zigbee, or WiFi. Will tie back to Home Assistant.

you are viewing a single comment's thread
view the rest of the comments

[–] schadwick@alien.top 1 points 11 months ago

I recommend running a new cable into the attic, with the Zigbee/WiFi relay device in the utility room, garage, or basement, wired in parallel to a manual override switch.

Another option is to disable the recirculation pump in the attic, and install another one (or the same one relocated) where it is more accessible. I have a Grundfos pump next to the hot water heater in the garage, and the pump is plugged into a battery-backed timer.