this post was submitted on 23 Jun 2024
28 points (88.9% liked)

Linux

48069 readers
1341 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 5 years ago
MODERATORS
 

hardware is a nuked MacBook Pro, Intel Core i5-4278U @ 2.60GHz, model A1502 (EMC 2875), Retina Mid-2014 13" with debian 12.5 live xfce installed (I couldn't fully install any of the netinst candidates).

As posted before, I consider this a really slow notebook and to compare and give you an idea, I need benchmarks. Download speed works fine via USB-tethering with an android device but the installation speed is ridiculously slow. System reacts very slow after entering username and password as well.

I'll try gnome and cinnamon later and compare.

top 7 comments
sorted by: hot top controversial new old
[–] Yuki@kutsuya.dev 9 points 4 months ago (2 children)

What do you mean by nuked?

[–] Voyajer@lemmy.world 8 points 4 months ago

It might be a reference to not having macos installed.

[–] Voyajer@lemmy.world 1 points 4 months ago

It might be a reference to not having macos installed.

[–] bloodfart@lemmy.ml 8 points 4 months ago

Cat /proc/cpuinfo will tell you the bogomips.

If your old core processor is slow, open the laptop up, remove and clean the fan, remove the heatsink and clean it and the processor die with isopropyl alcohol and apply new thermal grease before you put it all back together.

If you have bad I/o with an ssd of some sort, do a spinrite level 2 scan of the drive. It reads and then rewrites all the blocks, which fixes the problem.

I used this exact model for years and idk what your expectation is but I found it to be right fast.

Don’t bother benchmarking a laptop unless you’ve cleaned the dust out, regreased the cpu and run a lvl2 scan on the ssd. All you’ll have is a number that tells you “yep, it’s slow.” And someone like me will say exactly what I just did.

[–] possiblylinux127@lemmy.zip 6 points 4 months ago

I don't get it. Why do you want a benchmark?

[–] Unlix86@lemmy.blahaj.zone 5 points 4 months ago

I usually just use primesieve as cpu benchmark

[–] arthur@lemmy.zip 4 points 4 months ago