this post was submitted on 14 Nov 2024
4 points (83.3% liked)

Buildapc

3788 readers
2 users here now

founded 1 year ago
MODERATORS
 

I got a new monitor somewhat recently, and I have noticed it causing interference with my wifi card (Ax210, not sure what brand). The wifi gets really slow (like 1/10 speed, sometimes dropping connections) when the monitor is plugged in and goes back to normal when unplugged. I've tried multiple hdmi cables but it still does it. I know you can buy antennas that can be moved, but I'm not sure where to start looking for them. Does anyone have any recommendations or info?

Edit: solution was putting aluminum foil around GPU Iowa and cable

top 4 comments
sorted by: hot top controversial new old
[–] catloaf@lemm.ee 2 points 1 day ago (1 children)

What monitor? Sounds like it's leaking EM radiation. You could probably just shield it with some aluminum foil.

I'd also check the power cable, since power circuits are usually where EM leaks originate (usually being higher wattage and much dirtier). I'd be suspicious of the transformer on the cable, if there is one.

[–] HumanPerson@sh.itjust.works 2 points 1 day ago* (last edited 1 day ago)

The monitor's on the other side of the desk. It could be the issue but it doesn't affect my phone or laptop which are closer to the monitor. I will mess around with aluminum foil because that sounds wonderfully janky.

Edit: foil around cable and GPU io fixed it. It is up to about 3/4 of speed with monitor unplugged, which is a massive improvement and perfectly usable. Thanks so much for the suggestion.

[–] Telorand@reddthat.com 1 points 1 day ago

Any omnidirectional antenna should be fine. You'll want to either get one for each antenna connection or find one that has the same number of connectors as your card.

Generally, longer antennas mean more sensitive reception and probably better transmission.

[–] iii@mander.xyz 1 points 1 day ago

Damn that's old school. Haven't seen those since the 00's.