this post was submitted on 05 Jul 2023
24 points (100.0% liked)

Ask Electronics

3261 readers
1 users here now

For questions about component-level electronic circuits, tools and equipment.

Rules

1: Be nice.

2: Be on-topic (eg: Electronic, not electrical).

3: No commercial stuff, buying, selling or valuations.

4: Be safe.


founded 1 year ago
MODERATORS
 

Here's a power cable from a Cmt-ex1 Sony CD player. This connector used to be connected to the inside of the power supply. However, I had to disassemble it because I needed to replace the motherboard for the CD player. I found this CD player at Goodwill, but the wire was poorly connected with a completely different cable. It was patched together using electrical tape and wire connectors. If there isn't any type of connector like this in the world. how could I Frankenstein it with another cable without it looking somewhat ugly.

The original cable was called E81093 (UL) NISPT-2 VW-1 105C 2X18AWG, C(UL) NONINTEGRAL SPT-2 FT1. Also the yellow plastic says Amp with a + on top of the M. this CD player is from 2000.

all 4 comments
sorted by: hot top controversial new old
[–] boothin@kbin.social 7 points 1 year ago (1 children)
[–] FrankOcean@discuss.tchncs.de 4 points 1 year ago

thats the one!

Looks proprietary to me, sorry 😔. If it is 2 wire I would change it to standard barrel connector