this post was submitted on 12 Mar 2024
203 points (89.5% liked)

DeGoogle Yourself

8807 readers
28 users here now

A community for those that would like to get away from Google.

Here you may post anything related to DeGoogling, why we should do it or good software alternatives!

Rules

  1. Be respectful even in disagreement

  2. No advertising unless it is very relevent and justified. Do not do this excessively.

  3. No low value posts / memes. We or you need to learn, or discuss something.

Related communities

!privacyguides@lemmy.one !privacy@lemmy.ml !privatelife@lemmy.ml !linuxphones@lemmy.ml !fossdroid@social.fossware.space !fdroid@lemmy.ml

founded 4 years ago
MODERATORS
203
submitted 8 months ago* (last edited 8 months ago) by jjlinux@lemmy.ml to c/degoogle@lemmy.ml
 

I set up a Raspberry Pi 3 with AdguardHome for a friend of mine, and told him to disconnect everything at home and try to watch anything on his phone, being the only device using his home's internet.

He just sent me this, and now he's ready to #degoogle ๐Ÿคฃ๐Ÿคฃ๐Ÿคฃ

He says there were hundreds in less than 5 minutes.

top 50 comments
sorted by: hot top controversial new old
[โ€“] Player2@lemm.ee 42 points 8 months ago (1 children)

I agree that these should be blocked for privacy, but the amount of these requests is really completely meaningless. The reason there are so many is because they are blocked, not despite it. It will keep trying over and over on failure.

[โ€“] Zeroc00l@sh.itjust.works 10 points 8 months ago

Yep, it's the same with Plex analytics on my server. Every minute or so it's reaching out to the void. I've disabled it on my accounts privacy settings page but it still tries.

[โ€“] KoboldCoterie@pawb.social 39 points 8 months ago (1 children)
[โ€“] jjlinux@lemmy.ml 19 points 8 months ago (1 children)

They're just too much, seriously. He's getting a Pixel 6 Pro to put GraphenOS on it. I have the 7Pro and have been on Graphene or Calyx for about 2 years now. No regrets.

[โ€“] PoorPocketsMcNewHold@lemmy.ml 8 points 8 months ago (5 children)

Tell him to make sure to change the Connectivity check domains to GrapheneOS ones. Plenty of people im this thread explained you about those. In theory, ypu could disable it, but the main OS will assume you have no connection, despite actually able to connect, and some apps may break.

load more comments (5 replies)
[โ€“] vox@sopuli.xyz 35 points 8 months ago* (last edited 8 months ago) (1 children)

there are hundreds because they got blocked.
android phones actively retry connectivity checks every 3 seconds until a successful connection is achieved, then it ramps down to a check every 5 minutes, and the default server is google's. (this functionality is used for the little exclamation mark next to the wifi icon if there's no internet connection)
no data is sent along that request (it's just a GET request), not even useragent etc (the only thing google gets is the source of the request, aka the ip address, which is basically meaningless if it's not associated with any other data)
you should actually be able to point that domain to any ip that responds with empty body + http 204 code to /generate_204 and it should work as expected

[โ€“] jjlinux@lemmy.ml 5 points 8 months ago

Oh, cool. I'll look into redirecting these to a 204. That should be a pretty interesting experiment for me. Thank you.

[โ€“] ZombiFrancis@sh.itjust.works 24 points 8 months ago

Bro its just one more connectivity check bro just another connectivity check bro its just a connectivity check bro

[โ€“] Auzy@beehaw.org 20 points 8 months ago (4 children)

That shows they're doing a connectivity check to see if they're online (which they aren't).. And grabbed Android TV channels.

Connectivity checks in particular are absolutely standard practice. Even many routers do them

I'm not convinced this is a good reason for dumping google

load more comments (4 replies)
[โ€“] shortwavesurfer@monero.town 10 points 8 months ago

To be fair, I do agree the connectivity check should not be there. It should just let you connect to the network, and if it doesn't have internet, then so be it. You'll figure that out the second you try to load something. Plus, it makes it really annoying to set up a new Wi-Fi router or something without internet because you have to disable data and then turn on Wi-Fi and connect to the network to force it to stay on the network and not switch over to mobile data.

[โ€“] invisiblegorilla@sh.itjust.works 6 points 8 months ago (1 children)

Lol.. Disconnect all devices.... That would take me a good half hour..

Just use the filter

[โ€“] jjlinux@lemmy.ml 2 points 8 months ago

I hear you. He has maybe 7 devices total in his house, whereas I have upwards of 150. I'd have to basically kill all my VLANs, create a temporary WiFi network just for this, and test, only to return everything back to normal afterwards. That'd be the easiest and fastest route for my infrastructure.

load more comments
view more: next โ€บ