InfaSyn

joined 1 year ago
[–] InfaSyn@alien.top 1 points 11 months ago

With PubKey and Fail2Ban its probably ok but wouldnt chance it personally. Can you use a different port too?

[–] InfaSyn@alien.top 2 points 11 months ago

321 rule - anything super critical also gets off-sited to the cloud.

[–] InfaSyn@alien.top 1 points 11 months ago

All of the above. + Archival

[–] InfaSyn@alien.top 1 points 11 months ago

Law suit evidence, payslip/tax stuff and car service history are my main 3

 

Hi all

For the last 10 or so years, I have been running rack mount servers in my homelab with hardware RAID and ESXI.

Because of noise space power etc, I was planning to migrate to a single ATX box. This means id likely be running 13/14th Gen Intel.

Given ESXIs lack of support for software raid and efficiency cores, I feel its finally time to move to an alternative. A good 75% of my workload at this point is containerized, but I do still need a handful of VMs. Id also really like NVME RAID 1 if possible.

Im not against ZFS, but I have ZERO hands on experience with it so not sure if id want to go all in with no prior experience. I have tried proxmox before and find the UI hateful, so id rather steer clear.

What would be my best option other than rawdog Debian + MD raid?

[–] InfaSyn@alien.top 1 points 11 months ago

Too bloated, too unstable, too insecure.

Will just reboot all the time and whore memory. Way more susceptible to malware.

[–] InfaSyn@alien.top 1 points 1 year ago

Couple of tools ive wanted

  1. Proper car service history tracking thing that allows you to create a vehicle, then log services/repairs/consumables with dates, prices, locations, maybe even upload the invoices etc. Bonus points if it can generate a PDF service report for when its time to sell the car. Could also integrate chosen service intervals etc so you can view what milages things are next due. I did see hammond but it feels more operational cost logging focused (eg fuel expenses)

  1. A computer bench marking system where you can create a configuration, add a benchmark type, then record the benchmark results. This could then make pretty graphs etc to compare different configurations/benchmarks
[–] InfaSyn@alien.top 1 points 1 year ago

Would guestimate the PC (with no GPU) to pull maybe 100w assuming an average load of 20 ish percent. - 40 of this would come from drives (about 10w each).

This would be about 2.4kwh/day or in the UK, around £0.70 on a cheap tariff (or £255 a year). Obviously these figures vary massively depending on power cost per kwh in your region

[–] InfaSyn@alien.top 1 points 1 year ago (5 children)

Sounds like a 24port none poe is the one for me then! Thats only 10w more than the mikrotik

 

Hi all

A year ago I replaced my Juniper EX4200 48T for a Mikrotik CSS326-24G-2S+ as it was silent and used a fraction of the power (12w vs around 300w!).

Unfortunately, the 10Gb performance on the Mikrotik has always been weak and its pretty much died after about a year.

Any suggestions for a rack mount switch that has 24/48 gigabit ports, 2-4 10Gb SFP+ ports and isnt super noisy? - Brand new cheap end or used ebay enterprise is fine.

ICX 6450-48P maybe looking like my best option so far?