The module needs neutral to power itself. A lot of the non-neutral units needs hubs or do nothing when the switch is turned off. This one will likely have some small power draw but stays connected at all times
Needing the neutral is normal, just be very careful of a short-circuit if you’re wiring it yourself.
Also to avoid confusion most folks refer to L as line for power and Load for application.
The module needs neutral to power itself. A lot of the non-neutral units needs hubs or do nothing when the switch is turned off. This one will likely have some small power draw but stays connected at all times
Needing the neutral is normal, just be very careful of a short-circuit if you’re wiring it yourself.
Also to avoid confusion most folks refer to L as line for power and Load for application.
Hope this helps!