You have to say it 3 times
Theoriginalthon
joined 1 year ago
What you just described is called cooking.
Red number plates? Didn't notice that, however they seem incapable of navigating roundabouts
External drive? Is it a usb drive? If it is you might be best pulling out the drive and connecting it to a sata port. The mount as read only and do what everyone else suggests
My Googlefu says you can get a cheap rifle for $500, maybe because it's the cheapest rifle with a magazine?
I don't know I'm in the UK
If it works fine on other networks then it's your router provided by the ISP that's the problem. If you can try setting 2.4 and 5Ghz networks to separate SSIDs with different passwords. I've got a couple of devices on my network that refuse to work if the networks are combined. You could try a different WiFi access point, an older unifi can be picked up cheap on eBay on if it's just for testing. I was having similar issues with a Nintendo switch whilst working away, the hotels WiFi was just messed up
Did you know K-9 mail is soon to be thunderbird mobile
I went through this at the beginning of the year, it get 900/900 fibre, settled on openwrt running on a nanopi r4s. My other options were a nanopi r6s with openwrt, or nuc type hardware/server running something like pfsence/opnsence etc. The openwrt install took about 5mins then a couple of hours of exploring various menus options etc, which I didnt end up changing.
The r4s doesn't have eMMC where as the r6s does. I just left the SD card as rw, I'm not too concerned about failure, I'm hoping for some wear leveling built in, if not SD cards are cheap. I should probably clone the disk and have a cold spare SD card.
Storage wise I'm using 17. 63MiB of 29.38GiB, I think I may have bought a too big SD card Ram usage is around 88MiB of 3.87GiB I have got a couple of more things to set up like wireguard but as it stands I'm glad I went the openwrt route over a full server install
I looked at the nanopi r4s and the r6s when I replaced my router. I did consider doing it all myself but in the end settled on the r4s running opwenwrt, I think it took all of 5mins from download to working system. The benefit been the openwrt image has uboot included so only one image need writing, also web interface out of the box
Don't think of it as an installation, it's writing image files to disk. I prefer using gparted or disks when working with partitions. Then use dd for the actual writing as I can quite easily see I've got the right partition from gparted/disks. Got that wrong a couple of times 😅
view more: next ›
Yes to unified inbox, not sure about exchange but works well with IMAP