overview for businessfish

what could cause one of my monitors to be stuck at 640x480 only on the first boot after a system update? in c/linux@lemmy.ml

[–] businessfish@lemmy.blahaj.zone 1 points 2 months ago

in case anyone is reading this looking for a solution the cable was not the culprit

what could cause one of my monitors to be stuck at 640x480 only on the first boot after a system update? in c/linux@lemmy.ml

[–] businessfish@lemmy.blahaj.zone 1 points 2 months ago

nothing in between the computer and monitor - it's just plugged straight in. my current guess is that some step of pacman's install/update process changes something that also gets changed by something else (DE, config file, idk) after the boot.

what could cause one of my monitors to be stuck at 640x480 only on the first boot after a system update? in c/linux@lemmy.ml

[–] businessfish@lemmy.blahaj.zone 3 points 2 months ago (1 children)

could you elaborate?

i've been just dealing with this problem for an embarrassing amount of time now, and have gone through several version updates of the nvidia drivers with this problem persisting. i've also tried reinstalling the nvidia drivers with no change.

what could cause one of my monitors to be stuck at 640x480 only on the first boot after a system update? in c/linux@lemmy.ml

[–] businessfish@lemmy.blahaj.zone 5 points 2 months ago

no unfortunately god's intended resolution is just slippin right into my arch install uninvited

what could cause one of my monitors to be stuck at 640x480 only on the first boot after a system update? in c/linux@lemmy.ml

[–] businessfish@lemmy.blahaj.zone 4 points 2 months ago (1 children)

that's worth checking - i don't have a spare DP cable on hand to test, but you may be onto something.

previously, i tried unplugging and replugging the cable on the PC end, as well as trying other ports, to no avail.

just now, i tried replugging the end plugged into the monitor a few times and was able to reproduce the resolution issue a single time. this honestly just confuses me more though, because why would it happen only one time out of several cycles doing the exact same thing?

i'm gonna get another cable just to be sure but that wont be for a few days at least.

what could cause one of my monitors to be stuck at 640x480 only on the first boot after a system update? in c/linux@lemmy.ml

[–] businessfish@lemmy.blahaj.zone 5 points 2 months ago (1 children)

while i appreciate the effort, this has no effect on my issue. also maybe worth noting, i am using grub but not nomodeset. i toggled it on just to see if it would do anything but the problem persists.

if you look at my xrandr output on the first boot, the main problem is that it cannot see any other mode except 640x480 and running xrandr --output DP-0 --mode 1920x1080 fails. i cannot change it using plasma's display settings gui or xrandr in any way - the only way i know how to get access to the other resolution/rate settings of that monitor is by rebooting.

38

what could cause one of my monitors to be stuck at 640x480 only on the first boot after a system update? (lemmy.blahaj.zone)

submitted 2 months ago* (last edited 2 months ago) by businessfish@lemmy.blahaj.zone to c/linux@lemmy.ml

14 comments fedilink

when i boot my computer after having run an update, my primary monitor (which should be at 1920x1080) is stuck at 640x480. interestingly, when i reboot and change nothing, it fixes itself until i run another update.

i'm on arch, using nvidia 555.58-2, on plasma 6.1.1-1. the monitor in question is DP-0 in the system info below.

what could be causing this and how can i fix it?

i've been having this issue for a while while kinda just dealing with it because it was something i could easily work around by booting my computer twice, but i'd really like to get it solved.

system info:

relevant (i think) inxi output

System:
  Host: ***** Kernel: 6.9.7-arch1-1 arch: x86_64 bits: 64
  Desktop: KDE Plasma v: 6.1.1 Distro: Arch Linux
Graphics:
  Device-1: NVIDIA GP104 [GeForce GTX 1080] driver: nvidia v: 555.58
  Device-2: EMEET HD Webcam C960 driver: snd-usb-audio,uvcvideo type: USB
  Display: x11 server: X.Org v: 21.1.13 with: Xwayland v: 24.1.0 driver: X:
    loaded: N/A failed: nvidia gpu: nvidia resolution: 1: 1920x1080
    2: 1920x1080~60Hz 3: 1920x1080~60Hz
  API: EGL v: 1.5 drivers: kms_swrast,nvidia,swrast
    platforms: gbm,x11,surfaceless,device
  API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: nvidia mesa v: 555.58
    renderer: NVIDIA GeForce GTX 1080/PCIe/SSE2
  API: Vulkan v: 1.3.279 drivers: nvidia surfaces: xcb,xlib

xrandr from first boot

Screen 0: minimum 8 x 8, current 4480 x 1080, maximum 32767 x 32767
DVI-D-0 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 509mm x 286mm
   1920x1080     60.00*+
   1680x1050     59.95  
   1440x900      59.89  
   1280x1024     60.02  
   1280x800      59.81  
   1280x720      60.00  
   1152x864      75.00  
   1024x768      70.07    60.00  
   800x600       60.32    56.25  
   640x480       59.94  
HDMI-0 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 1600mm x 900mm
   3840x2160     30.00 +  59.94    29.97    23.98  
   4096x2160     59.94    24.00  
   1920x1080     60.00*   59.94    29.97    23.98    60.00  
   1680x1050     59.95  
   1440x900      59.89  
   1280x1024     60.02  
   1280x960      60.00  
   1280x800      74.93    59.81  
   1280x768      59.87  
   1280x720      60.00    59.94    29.97    23.98  
   1024x768      60.00  
   800x600       60.32    56.25  
   720x480       59.94  
   640x480       59.94    59.93  
DP-0 connected 640x480+3840+0 (normal left inverted right x axis y axis) 0mm x 0mm
   640x480       59.94*+
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
DP-3 disconnected (normal left inverted right x axis y axis)
DP-4 disconnected (normal left inverted right x axis y axis)
DP-5 disconnected (normal left inverted right x axis y axis)

xrandr from the second boot

Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767
DVI-D-0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 509mm x 286mm
   1920x1080     60.00*+
   1680x1050     59.95  
   1440x900      59.89  
   1280x1024     60.02  
   1280x800      59.81  
   1280x720      60.00  
   1152x864      75.00  
   1024x768      70.07    60.00  
   800x600       60.32    56.25  
   640x480       59.94  
HDMI-0 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 1600mm x 900mm
   3840x2160     30.00 +  59.94    29.97    23.98  
   4096x2160     59.94    24.00  
   1920x1080     60.00*   59.94    29.97    23.98    60.00  
   1680x1050     59.95  
   1440x900      59.89  
   1280x1024     60.02  
   1280x960      60.00  
   1280x800      74.93    59.81  
   1280x768      59.87  
   1280x720      60.00    59.94    29.97    23.98  
   1024x768      60.00  
   800x600       60.32    56.25  
   720x480       59.94  
   640x480       59.94    59.93  
DP-0 connected primary 1920x1080+1920+0 (normal left inverted right x axis y axis) 531mm x 299mm
   1920x1080     60.00 + 144.00*  119.98    99.93    59.94    50.00  
   1680x1050     59.88  
   1440x900      59.90  
   1280x1024     75.02    60.02  
   1280x720      60.00    59.94    50.00  
   1024x768     119.99    99.97    75.03    70.07    60.00  
   800x600      119.97    99.66    75.00    72.19    60.32    56.25  
   720x576       50.00  
   720x480       59.94  
   640x480      119.52    99.77    75.00    72.81    59.94    59.93  
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
DP-3 disconnected (normal left inverted right x axis y axis)
DP-4 disconnected (normal left inverted right x axis y axis)
DP-5 disconnected (normal left inverted right x axis y axis)

[TechHut] my favorite app (Neofetch) is dead in c/technology@beehaw.org

[–] businessfish@lemmy.blahaj.zone 10 points 3 months ago

hey its me the guy you predicted would tell you the thing you said i would tell you

the reason people say neofetch is useless is because the information it gives you is not very detailed when compared to something like inxi for example

Boeing sales tumble as the company gets no orders for the 737 Max for the second straight month in c/technology@lemmy.world

[–] businessfish@lemmy.blahaj.zone 4 points 3 months ago

stuff them into a sack maybe

Photoshop Terms of Service grants Adobe access to user projects for ‘content moderation’ and other purposes in c/piracy@lemmy.dbzer0.com

[–] businessfish@lemmy.blahaj.zone 37 points 3 months ago

corporation yet again proving that if you want to be free to use your own things that you paid for on your own computer you can never trust anything that requires an internet connection to not trample all over your rights

love it very cool really vibing with the current state of software and the internet

It's time to move to Linux - YouTube in c/linux@lemmy.ml

[–] businessfish@lemmy.blahaj.zone 10 points 3 months ago

it really is crazy how different it feels to use a linux pc after being conditioned to think that windows is just how using a computer is. the way i relate it to my friends is that using windows feels like i'm constantly compromising with the computer, but using linux i own my computer and it works for me - not the other way around.

‘Stroads’ Aren’t Streets. They Aren’t Roads. And They Don’t Work. in c/fuckcars@lemmy.world

[–] businessfish@lemmy.blahaj.zone 2 points 3 months ago (1 children)

sure but i don't like watching videos of other people being angry, i'd rather he just delivered the information. and again, maybe i'm imagining the "shift" but after some point relatively recently his stuff felt different to me.

Platforms wonder why piracy is spiking in c/piracy@lemmy.dbzer0.com

[–] businessfish@lemmy.blahaj.zone 13 points 4 months ago (2 children)

There’s not enough of us, but I still don’t care. I refuse to pay to watch ads.

i had this conversation with my dad recently about how shitty everything is now with ads etc, and his response boiled down to "i don't care enough". sucks to see people being complacent in being subject to greedy corporate whims. as much as i want people with that mindset to care, i have no idea how to effectively argue against "i don't care".

14

a couple audio questions - how to set audio levels automatically or via cli? (lemmy.blahaj.zone)

submitted 5 months ago* (last edited 5 months ago) by businessfish@lemmy.blahaj.zone to c/linux@lemmy.ml

4 comments fedilink

hi all,

i've been getting some comments that my mic is quiet so before i go looking for a new one, i thought i'd check to see if this could be solved with software. i don't have an amp or anything for my mic and to my knowledge it shouldn't need one, but it is pretty old now and i forgot what actual product it is.

i'm on arch using kde with pipewire. i am already using kde's (or maybe something else does this idk) feature to raise maximum volume to 150% in the audio volume window, but this will turn itself off at unpredictable intervals and is also seemingly not always enough.

so i ask - is it possible to set some setting or use some linux audio magic to raise my mic output volume? and in the same vein of changing/setting audio levels, is it possible to configure the volume level on my system to not go above a certain level - as in all audio above x level is clamped back down to x?

full transparency edit - not 10 minutes after hitting the post button i found the volume knob on my mic that i swear to god was hiding so well and was definitely not just right there the whole time and definitely not accidently turned way down. still would like an answer to the second question though lmao

29

linux-compatible speedrunning tools and/or livesplit tricks (lemmy.blahaj.zone)

submitted 6 months ago by businessfish@lemmy.blahaj.zone to c/linux_gaming@lemmy.ml

8 comments fedilink

hi, is there anyone else here who is disappointed with the speedrunning tools available for linux users?

i've tried livesplit through wine but i can't get global hotkeys or autosplitters working, and speedrunning in general doesn't allow for the leeway required to tab out, split, and tab back in. i did give this a shot but it seems like livesplit server is deprecated and the project never got any more work done. also tried livesplit one, but again i couldn't figure out global hotkeys or auto splitting.

i used to use a tool called flitter but i would really prefer something more configurable like livesplit.

ok actually midway through writing this and looking for links to the things i've used in the past, i found this tool that does support global hotkeys. autosplitter would be nice, but it's better than the rest.

i'll still post this though - i'm curious if there are any tools/tips/tricks/etc others have to share.