Is your ISP using CGNAT? If so, your IP address is likely shared with dozens of other people. Each user gets a different set of ports and your ISP knows which ports each person is using so they can send the nasty letter to the correct person.
cmnybo
You can always use Jellyfin or Kodi with your old Fire TV and get your Netflix shows elsewhere.
I got an old thermal receipt printer, plugged it into the parallel port and echoed some text to /dev/lp0 and it printed. I didn't have to set anything up. I did have to write a simple python script to make it print images though.
It is being pushed beyond its ratings, so there's no guarantees that it will work. There's no harm in trying Cat5e at higher speeds if it's already installed, but don't install it with the intention of using it at more than 2.5G.
It's impressive that they got the power consumption down to less than 2 watts. I think this is the first 10GBASE-T NIC I've seen that doesn't have a heatsink on it.
Heat makes lithium ion batteries fail much quicker. A non rechargeable lithium AA would last a long time and they don't leak like alkaline batteries.
Gas valves and igniters don't even need much power. They could put a battery in there so it could be used when the power is out. My propane fireplace runs for years on 4 AA batteries and that's powering the receiver for the remote too.
Why do they need an app instead of just using cell tower data? I guess you just take a flip phone then.
with one poster claiming to have received almost $1,800 this week for a TV returned to the retailer in 2018.
Wow, I would have filed a charge back and deleted my account if Amazon did that to me.
The most common grades of neodymium magnets will demagnetize at around 60-80°C. Even if they could handle the temperature, they wouldn't stay in place well since they are smooth.
Epoxy and super glue both work well for gluing the magnets in a hole. Rough up the back side if the magnet so the glue has something to hold on to though.
That's usually just a pin making bad contact with the socket due to oxidation. Reseating all of the tubes usually fixes it. If not, then it's probably a cracked solder joint.
Almost every scam email I get comes from a gmail address. If a business is not sending emails from their own domain, I automatically assume it's a scam.