doctorzeromd

joined 1 year ago
[–] doctorzeromd@lemmy.world 1 points 5 months ago

That's for logging into the web GUI IIRC, not for authorizing a connection from wg client to wg server.

[–] doctorzeromd@lemmy.world 7 points 5 months ago (1 children)

Source? I remember a follow up to a post about that saying it was a misinterpretation of their T&Cs

[–] doctorzeromd@lemmy.world 1 points 5 months ago (1 children)

I have a reverse proxy, but that won't do ALL traffic, right? Just http or https?

Like if I want to ssh into the different servers, it won't handle that, will it?

[–] doctorzeromd@lemmy.world 3 points 5 months ago* (last edited 5 months ago) (4 children)

I have a reverse proxy, but that won't do ALL traffic, right? Just http or https?

Like if I want to ssh into the different servers, it won't handle that, will it?

 

cross-posted from: https://lemmy.world/post/14180956

Hello all you lovely people!

I'm trying to figure out if I can port forward to different servers based on the destination domain.

I have a domain with a wildcard cert and I'd like to be able to route all traffic headed towards "1.domain.com" to a server I'm calling "1". I'd still like traffic headed to domain.com to go to where it's currently going, we can call this server "0", and to be able to have a 2.domain.com or 3 or 4 in the future.

I thought that having a port forward rule with: interface: WAN Protocol: any source: any destination: a url alias including 1.domain.com redirect target ip: local ip

Would work, but it doesn't seem to. Any tips?

 

Hello all you lovely people!

I'm trying to figure out if I can port forward to different servers based on the destination domain.

I have a domain with a wildcard cert and I'd like to be able to route all traffic headed towards "1.domain.com" to a server I'm calling "1". I'd still like traffic headed to domain.com to go to where it's currently going, we can call this server "0", and to be able to have a 2.domain.com or 3 or 4 in the future.

I thought that having a port forward rule with: interface: WAN Protocol: any source: any destination: a url alias including 1.domain.com redirect target ip: local ip

Would work, but it doesn't seem to. Any tips?

[–] doctorzeromd@lemmy.world 2 points 6 months ago

Possibly, but more likely the computer was just in need of some cleaning.

My friend plays Helldivers 2 on his laptop with integrated graphics on medium and hits 30fps. Any CPU from the last 8 years should be enough.

For the finals, yeah maybe you need something more powerful than that, but not by much. A 2070 is a fantastic GPU, it would be pretty weird to have a GPU from 2018 but a CPU from way earlier.

[–] doctorzeromd@lemmy.world 1 points 6 months ago (1 children)

Who are you referring to?

Are you talking about the second dev? I was pretty aware of the community at the time and didn't hear anything like this about the original dev.

[–] doctorzeromd@lemmy.world 2 points 6 months ago

Final Update: it's the hardware, I think it was overheating in general, but also the SSD seems to have been dying and the ram wasn't particularly reliable, possibly due to the heat.

Good lesson not to buy the cheapest thing from AliExpress! My new box is working great.

[–] doctorzeromd@lemmy.world 1 points 6 months ago (2 children)
[–] doctorzeromd@lemmy.world 2 points 6 months ago* (last edited 6 months ago) (1 children)

UPDATE: It crashed again today, and I was able to pull some logs and check the temperature at the time of the crash. (91 degrees which dropped to 71 degrees right before crashing?

From system log

<13>1 2024-03-13T18:30:44-04:00 OPNsense.my.home opnsense 44846 - [meta sequenceId="1192"] /usr/local/etc/rc.newwanipv6: No IP change detected (current: IPV6ADDRESSREDACTED, interface: wan)
<13>1 2024-03-13T18:30:53-04:00 OPNsense.my.home opnsense 60522 - [meta sequenceId="1193"] /usr/local/etc/rc.newwanipv6: No IP change detected (current: IPV6ADDRESSREDACTED, interface: wan)
<45>1 2024-03-13T22:12:44-04:00 OPNsense.my.home syslog-ng 10182 - [meta sequenceId="1"] syslog-ng starting up; version='4.6.0'
<13>1 2024-03-13T22:12:45-04:00 OPNsense.my.home kernel - - [meta sequenceId="2"] ---<<BOOT>>---
<13>1 2024-03-13T22:12:45-04:00 OPNsense.my.home kernel - - [meta sequenceId="138"] WARNING: / was not properly dismounted

From dmesg

arp: 192.168.1.61 moved from someMAC to anotherMAC on igc1
arp: 192.168.1.61 moved from anotherMAC to someMAC on igc1
WARNING: / was not properly dismounted
WARNING: /: mount pending error: blocks 40 files 4

I mean, I'm not saying that errors on the drive are the CAUSE of the problem, more likely a symptom, but it does look like it just straight up crashed, right?

[–] doctorzeromd@lemmy.world 1 points 6 months ago

Dmesg doesn't go back very far, does it? I only see the current boot and the one before that, which was a normal shutdown.

I believe I was able to see the last logs before the system turned off last time, and the last messages were syncing discs and all buffers synced, which I would have expected to be part of a normal shutdown.

If it happens again I'll be sure to get the logs before the crash or shut down and save it to a file.

 

Hi all, I've got a cheap Celeron box running OPNSense and it's been pretty good so far, but I found twice that the device turned off at some point while I was at work, and I have been unable to figure out what's causing it.

The only change was that I enabled Monit to see if I could figure out what was causing crowdsec to stop sometimes but never ended up configuring anything. I've only been running it for a couple months though, so it's possible that that is not related.

I know that on a Mac (based on freebsd, right?) you can determine whether the shutdown reason was a hard shutdown, regular shutdown, or the power cable being unplugged. Is it possible to do that with OPNSense? I'd like to narrow it down to software or hardware ideally.

 

Hi all, I've got a cheap Celeron box running OPNSense and it's been pretty good so far, but I found twice that the device turned off at some point while I was at work, and I have been unable to figure out what's causing it.

The only change was that I enabled Monit to see if I could figure out what was causing crowdsec to stop sometimes but never ended up configuring anything. I've only been running it for a couple months though, so it's possible that that is not related.

I know that on a Mac (based on freebsd, right?) you can determine whether the shutdown reason was a hard shutdown, regular shutdown, or the power cable being unplugged. Is it possible to do that with OPNSense? I'd like to narrow it down to software or hardware ideally.

[–] doctorzeromd@lemmy.world 7 points 6 months ago

Especially when the software they're developing is an emulator or for phones. This was both!

view more: next ›