rehydrate5503

cross-posted from: https://lemmy.world/post/21641378

So I just added a TP-Link switch (TL-SG3428X) and access point (EAP670) to my network, using OPNSense for routing, and was previously using a TP-Link SX-3008F switch as an aggregate (which I no longer need). I’m still within the return window for the new switch and access point, and have to admit the sale prices were my main reason with going for these items. I understand there have been recent articles mentioning TP-Link and security risks, so I’m thinking if I should consider returning these, and upping my budget to go for ubiquity? The AP would only be like $30 more for an equivalent, so that’s negligible, but a switch that meets my needs is about 1.6x more, however still only has 2 SFP+ ports, while I need 3 at absolute minimum.

I’m generally happy with the performance, however there is a really annoying bug where if I reboot a device, the switch drops down to 1G speed instead of 10G, and I have to tinker with the settings or reboot the switch to get 10G working again. This is true for the OPNSense uplink, my NAS and workstation. Same thing happened with the 3008F, and support threads on the forums have not been helpful.

In any case, any opinions of switching to ubiquity would be worth it?

Hi all,

I’m having an issue with an NFS mount that I use for serving podcasts through audibookshelf. The issue has been ongoing for months, and I’m not sure where the problem is and how to start debugging.

My setup:

• Unraid with NFS share “podcasts” set up
• Proxmox on another machine, with VM running Fedora Server 40.
• Storage set up in Fedora to mount the “podcasts” share on boot, works fine
• docker container on the same Fedora VM has Audiobookshelf configured with the “podcasts” mount passed through in the docker-compose file.

The issue:

NFS mount randomly drops. When it does, I need to manually mount it again, then restart the Audiobookshelf container (or reboot the VM, but I have other services).

There doesn’t seem to be any rhyme or reason to the unmount. It doesn’t coincide to any scheduled updates or spikes in activity. No issue on the Unraid side that I can see. Sometimes it drops over night, sometimes mid day. Sometimes it’s fine for a week, other times I’m remounting twice a day. What has finally forced me to seek help is the other day I was listening to a podcast, paused for 10-15 mins and couldn’t restart the episode until I went through the manual mount procedure. I checked and it was not due to the disk sinning down.

I’ve tried updating everything I could, issue persists. I only just updated to Fedora 40. It was on 38 previously and initially worked for many months without issue, then randomly started dropping the NFS mounts (I tried setting up other share mounts and same problem). Update to 39, then 40 and issue persists.

I’m not great with logs but I’m trying to learn. Nothing sticks out so far.

Does anyone have any ideas how I can debug and hopefully fix this?

Hello, I’m planning a rather large trip later this year and have been searching for something to help me plan and organize. I’ve come across a few apps that are not exactly privacy friendly, like TripIt and Wanderlog.

Does anyone know of any self hosted or otherwise open source alternatives to these apps?

Hi everyone,

I’m at my wits end here getting port forwarding working on my setup with Nginx Proxy Manager (NPM) and OPNsense.

I recently upgraded my networking gear, and everything is working great, I’m loving OPNsense and 10G networking. I’ve had the same setup for port forwarding for years and never had issues, the main change was the addition of OPNsense and a switch.

Previous setup (I realize this wasn’t the best):

ISP modem -> DHCPv4 with ports 80/443 forwarded to ASUS wireless router WAN -> DHCPv4 with ports 80/443 forwarded to VM on proxmox running NPM -> NPM set up with hosts to proxy services on other VMs/server.

This (or a variation thereof) has all been working great for years, along with ddns set up as I have a dynamic IP.

New setup:

ISP modem -> DHCP off with ports 80/443 forwarded to OPNsense WAN via MAC address -> OPNsense NAT-Port Forwarding set up to the NPM host/port, rest is the same as before.

The settings for the port forward are the standard I’ve found in guides. WAN address, any source/port, redirect to NPM host and ports. Tried the domain I usually use, no luck. Port checker shows the ports are closed.

Tried the following:

1. DMZ on the ISP modem keeping WAN IP default/automatic and adding OPNsense to the DMZ, no change.
2. Advanced DMZ on ISP, WAN is the external IP, no change
3. Same as 2, but changed OPNsense WAN settings from DHCPv4 to PPPoE, and added the ISP login info. Received new IP, updated ddns, still no change.
4. Checked over port forwarding settings, enabled NAT reflection, still nothing.

I’m between all these steps, I rebooted OPNsense, proxmox, switches, etc.

Any ideas on what I could try for next steps? All of the local networking and external connections work awesome, it’s just the port forwarding as the last piece. Thanks!

Edit 2023-01-03:

I finally solved this, turned out the OPNSense and NPM configuration was all correct.

The problem was a glitch in the docker compose/portainer. I had my ports in docker compose set to 80:80/443:443, but when the container was deployed, it assigned 1880:80/18443:443 because of…reasons, and I didn’t notice until going through it all line by line 🤦.

Redeploying the stack/container didn’t solve it, so I changed the time zone to another city, redeployed and viola, everything works perfect as it should!

Hi,

I’ve been running Linux for some time, currently on Nobara and happy. Running it on a 1TB NVME, and a second 1TB NVME drive for extra storage for games, etc., both at gen 3.

I find myself running out of room and just picked up 2TB and 1TB NVME drives, both gen 4, and am thinking as to what the best partition layout would be. The 2x1TB gen 3 will be moved to my NAS as a cache pool.

The PC is used for gaming, photo/video editing and web development.

I guess options would be:

1. OS on 2TB, and the 1TB for extra storage, call it a day.
2. OS on 1TB, and the 2TB for extra storage
3. Divy up the 1TB to have a partition for /, another for /home and another for /var and maybe another for games, then on the 2TB have one big partition for games and scratch disk for videos.
4. Same as option 3 but swap the drives around.

What would YOU do in this situation? I’m leaning towards option 3 or a variation there of, as it gives versatility to hop to a new distro if I want relatively easy, and one big partition for game storage/video scratch.

My mobo only supports 2xNVME drives unfortunately (regret not spending an extra $60-70 on a better one), but I have a USB-C NVME enclosure that I might use with a a spare 1TB that will be removed from the NAS.

Any thoughts?

Edit: sorry forgot to reply. Thank you all for the input, this was great information and I took a deep dive researching some solutions. I ended up just keeping it simple and went with option 2, with the 1TB as the OS drive and 2TB as additional storage, no additional partitions.

Hi everyone,

I’m not sure if this is the right community, but the home networking magazines seem to be pretty dead. I’m a bit green with regard to networking, and am looking for help to see if the plan I’ve come up with will work.

The main image in the post is my current network setup. Basically the ISP modem/router is just a pass through and the 10 Gb port is connected to my Asus router, which has the DHCP server activated. All of my devices, home lab and smart home devices are connected to the Asus router via either Wifi or Ethernet. This works well, but I have many neighbours close by, and with my 30+ wifi devices, I think things aren’t working as well as they could be. I guess you could say one of my main motivations to start messing with this is to clean it up and move all possible devices to Ethernet.

The planned new setup is as follows, but I’m not sure if it’s even possible to function this way.

https://i.postimg.cc/7YftSFt6/IMG-9281.jpg

ISP modem/router > 2.5 Gb unmanaged switch > 2.5 Gb capable devices (NAS, hypervisor, PCs) will connect directly here, along with a 1 Gb managed switch to handle the DHCP > Asus router would connect to the managed switch to provide wifi, and remaining wired devices will all connect to the managed switch as well.

Any assistance would be appreciated! Thanks!

Edit: fixed second image url