this post was submitted on 20 Nov 2023
1 points (100.0% liked)
Homelab
371 readers
3 users here now
Rules
- Be Civil.
- Post about your homelab, discussion of your homelab, questions you may have, or general discussion about transition your skill from the homelab to the workplace.
- No memes or potato images.
- We love detailed homelab builds, especially network diagrams!
- Report any posts that you feel should be brought to our attention.
- Please no shitposting or blogspam.
- No Referral Linking.
- Keep piracy discussion off of this community
founded 1 year ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Yea, but they won't be High Availability unless you have 3. Proxmox assigns HA Dynamically, meaning the machines vote. So you need a odd number. BUT, a cluster of 2 should be fine. Migrate the VMs over, to power down and perform maintence.
I really like the n5105 nas boards, and the jxxxxx nas boards. I went with n51505. Basically what "Wolfgang" did on YouTube. It's more than powerful enough, perhaps overkill. But the benefit is it's a lot of sata ports, on a mini it's board, which is rare. You might find a better setup, I'm still planning this section out.
You could just do what I did initially. I just copied Wolfgang's build. N5105 nas board, a nas case (I used the fractal node, in his video), and put 32gb of ram (overkill). And a psu with a 500gb nvme. You can install TrueNAS on here. Run everything on here, media server, containers, etc. set your drives to ZFS. Then when you want to expand, you can get the NAB6 or something different...
You need to plan for what you intend to do. The setup I recommended is for like many VMs, for home labbing enterprise software to learn it. In addition to home server stuff, like media, are, vault, cloud, immich, etc. even a few windows and Linux VMs. It's A LOT. You can simplify it. You can even run proxmox on the n5105. And just set up a ceph ZFS storage pool.