Homelab

371 readers

3 users here now

Rules

Be Civil.
Post about your homelab, discussion of your homelab, questions you may have, or general discussion about transition your skill from the homelab to the workplace.
No memes or potato images.
We love detailed homelab builds, especially network diagrams!
Report any posts that you feel should be brought to our attention.
Please no shitposting or blogspam.
No Referral Linking.
Keep piracy discussion off of this community

founded 1 year ago

MODERATORS

communick@selfhosted.forum

rglullis

APC UPS issue with USB interface due to internal defect (alien.top)

submitted 11 months ago by bythelake9428@alien.top to c/homelab@selfhosted.forum

4 comments fedilink hide all child comments

My preference was to share this with Schneider Electric / APC directly, but I couldn't find an email address, so I thought I'd leave this here in case others experience something similar.

I recently bought an APC Back UPS, model BVK750M2 (750VA/410W), for a small Proxmox server. I spent days trying to get the UPS's USB port to be detected, even trying older devices with USB 2 and 1 ports, but none seemed to detect this new UPS.

I'm in a very remote area, and this device is heavy, so I really wasn't interested in shipping it back to return it. In an act of desperation, I simply disassembled the unit. The rear USB type B port is mounted on a small PCB, with a white 4-wire cable that connects it to the main controller board. I thought I'd start there, testing each of the 4 wires for continuity.

Once I pulled that little white cable, I quickly noticed the issue. One pin was simply not set into the connector housing (see the picture). I pushed the offending pin fully into the housing and reconnected the cable, and now everything works as expected.

I'm not recommending that people start disassembling their UPSs. I'm only sharing my experience in case others are experiencing the same thing. My take-away from this is that APC does not test these units after assembly, because there's no way this USB port would have ever worked.

Stay awesome, Home Lab community!

https://preview.redd.it/m0807yz5g32c1.jpg?width=1575&format=pjpg&auto=webp&s=7cb75070a25415b17a726d7fabe8890afe07c0dc

you are viewing a single comment's thread
view the rest of the comments

[–] SteveAM1@alien.top 1 points 11 months ago

My APC (BN1500M2) just failed after less than a year. They are replacing it, but it’s definitely a pain.

The most annoying this was that the devices attached to it were losing power when the unit crashed, even though I wasn’t losing power on site. So it was failing at keeping continuous power being fed from the outlet. I was upset it failed after less than a year, buy I was really pissed my NAS was crashing when it was having problems.

I kind of wished I got a CyberPower.