this post was submitted on 24 Nov 2023
4 points (100.0% liked)
Homelab
371 readers
3 users here now
Rules
- Be Civil.
- Post about your homelab, discussion of your homelab, questions you may have, or general discussion about transition your skill from the homelab to the workplace.
- No memes or potato images.
- We love detailed homelab builds, especially network diagrams!
- Report any posts that you feel should be brought to our attention.
- Please no shitposting or blogspam.
- No Referral Linking.
- Keep piracy discussion off of this community
founded 1 year ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Brocade 6610-48p can be had for about $60 + shipping on eBay
They are EOL and server the home has provided all the firmware and licensing for them for free.
$370 (Australian dollars) + another $370 aud shipping... sigh, and that's the cheapest...
Do they even make PoE+ injectors that support 10GbE? If they do realistically I can just go with my original plan of the Ubiquiti XG Enterprise or something like that (tho I do also have concerns about their gear failing immediately out of warranty based on some anecdotal experiences some of my coworkers/friends have had)
There are 10Gbps PoE Injectors available, I have here a Modell from Digitus.
Way too loud if you don't butcher it and do a fan mod. Those are datacenter switches. Got mine yesterday as a core for smaller lan parties. Great hardware, very solid and I love it. Especially for the price of around 200 bucks with two psus and one additional fan. But it never will run in my house for regular operation. The 6450s on the other hand ...
Mine is pretty darn quiet 🤷♂️
Actually it's quieter than my hp procurve and my Plex server.
You'll want to make sure the 6610 is flashed, configured and running both power supplies. Out of the box it runs at max speed without configuration and if it's missing a PSU it will max the PSU fan to keep the internals cool.
Strange. Running it exactly like that. Any ressource for tweaking with the fan config?
Run "dm fan"
Here's mine
As well as "show chassis"
Here's mine as well
The stack unit 1 chassis info:
Power supply 1 (AC - PoE) present, status ok
Model Number: 23-0000142-02
Serial Number: 9FK
Firmware Ver: A
Power supply 1 Fan Air Flow Direction: Front to Back
Power supply 2 (AC - PoE) present, status ok
Model Number: 23-0000142-02
Serial Number: 91G
Firmware Ver: A
Power supply 2 Fan Air Flow Direction: Front to Back
Fan 1 ok, speed (auto): [[1]]<->2
Fan 2 ok, speed (auto): [[1]]<->2
Fan controlled temperature: 61.5 deg-C
Fan speed switching temperature thresholds:
Speed 1: NM<----->76 deg-C
Speed 2: 71<-----> 80 deg-C (shutdown)
Fan 1 Air Flow Direction: Front to Back
Fan 2 Air Flow Direction: Front to Back
MAC 1 Temperature Readings:
Current temperature : 49.0 deg-C
MAC 2 Temperature Readings:
Current temperature : 56.5 deg-C
CPU Temperature Readings:
Current temperature : 61.5 deg-C
sensor A Temperature Readings:
Current temperature : 50.5 deg-C
sensor B Temperature Readings:
Current temperature : 53.5 deg-C
sensor C Temperature Readings:
Current temperature : 39.5 deg-C
stacking card Temperature Readings:
Current temperature : 53.5 deg-C
Warning level.......: 77.0 deg-C
Shutdown level......: 80.0 deg-C
Amazing, thank you. But how do I set values for it?