homeassistant

20604 readers

46 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 3 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world

Trying to get Matter/Thread working (lemmy.world)

submitted 1 week ago* (last edited 1 week ago) by grue@lemmy.world to c/homeassistant@lemmy.world

17 comments fedilink hide all child comments

I'm trying to start using Thread devices in Home Assistant for the first time. I've gotten a Sonoff Dongle Plus MG24, flashed it with OpenThread firmware, added it as an OpenThread Border Router in Home Assistant, and added the Matter integration.

However, when I try to commission a Matter/Thread device using the Home Assistant companion app on my GrapheneOS phone, I scan the QR code, get to the screen that says "power on your device and make sure it's in setup mode," and "connect your phone to your main 2.4GHz network" and tap the "I'm ready" button, but then it gives me an error that I have "no Wi-Fi connection" even though it is definitely connected to the correct (2.4Ghz, not 5GHz) network.

I've also checked that the Home Assistant app has all the necessary permissions (network, nearby sensors, etc.)

Help?

Edit: I just found these bug report threads that look like they're relevant, but I'm still reading through them:

you are viewing a single comment's thread
view the rest of the comments

[–] tiramichu@sh.itjust.works 2 points 6 days ago

The normal consumer smartphone pairing flow uses Bluetooth on the phone to do the initial device pairing after you scan the QR code.

You just aren't made aware of that as the user.

The on-server flow also needs Bluetooth therefore, and all that's different is you manually type the numbers from the QR instead of using the camera to scan :)