this post was submitted on 24 Sep 2026
358 points (97.4% liked)

3DPrinting

23820 readers
189 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 3 years ago
MODERATORS
 

Eneloops would only last about 3 weeks. And disposable last 2 months. This door is used a lot and since it has Zwave and a door open sensor it sends info on every open.

Bonus, since it can handle the lipo AA batteries that put out 1.8v and it gives the motor more oomph I made the battery pack give 7.2v and it never sticks anymore.

This is a garage-door so its not critical access but is used a lot.

you are viewing a single comment's thread
view the rest of the comments
[–] BlackLaZoR@lemmy.world 14 points 1 day ago (1 children)

rechargeable AA suck.

No they don't

[–] Zedd_Prophecy@lemmy.world 2 points 1 day ago (4 children)

They do ... 1.2v output is low compared to the 1.5v alkaline .. they lose charge as they sit there doing nothing unless Enerloop which is expensive and still 1.2v - I recently converted the wife's led candles (2 x AA) each to 2 18650 each and now I don't have to charge the things for 15 or so weeks. This guy knows.

[–] brisk@aussie.zone 3 points 1 day ago* (last edited 1 day ago)

Low self discharge is the standard now, Eneloop is no longer unique.

That's only relevant for NiMH batts. If you use Lithium rechargeables, their curve is flat around 1.4V until they're close to dead.

[–] BlackLaZoR@lemmy.world 2 points 1 day ago

1.2v

The range is actually 1.4-0.9v with drop only at the end of the discharge cycle. Much better than regular AA that drops voltage proportionally to the discharge level. Also more amps than alkaline and no leakage.

Self discharge is a thing and putting it in clock or led candle is just doing it wrong. Use alkaline for these use cases.

[–] AnyOldName3@lemmy.world 3 points 1 day ago (1 children)

The internal resistance is much lower than that of an alkaline, so for some applications, a 1.2V NiMH will match or beat a 1.5V alkaline, but if you really need the extra 0.3V, then they're really pants.

[–] InFerNo@lemmy.ml 4 points 1 day ago* (last edited 1 day ago) (1 children)

I bought rechargeable AA lithium batteries. They have a usbc slot on the positive end. Really handy. They do 1.5V.

[–] BlackLaZoR@lemmy.world 2 points 1 day ago

Ah, portable fire hazard. Love it! :)