Home Automation

79 readers

2 users here now

Home automation is the residential extension of building automation.

It is automation of the home, housework or household activity.

Home automation may include centralized control of lighting, HVAC (heating, ventilation and air conditioning), appliances, security locks of gates and doors and other systems, to provide improved convenience, comfort, energy efficiency and security.

Warning: Working with electricity can result in injury, property damage, or even death if it is not done properly. Please keep this in mind while assisting others. If you are not sure about what you are doing, hire a licensed professional.

Rules

No abusive behaviour. This is a forum for friendly discussion; personal attacks will not be tolerated and you will be banned without warning.
Referral/affiliate links are NOT ALLOWED!
NO POLITICS! There are plenty of other communities to discuss them; this is not one.
When posting project details must be included. Posting a video or image without detail will result in a removed post and may result in a ban.
Crowdfunding links are not allowed.
Reposts, low-effort content and karma farming may be removed at the discretion of the mods. Posters may be banned without warning.

founded 1 year ago

MODERATORS

communick@selfhosted.forum

How do I remove this vintage Sears intercom speaker? (alien.top)

submitted 11 months ago by FroMan753@alien.top to c/homeautomation@selfhosted.forum

12 comments fedilink hide all child comments

https://postimg.cc/gallery/yJZ4BRf

House was built in the early 1970s, so I presume this Sears Intercom is from around the same time. I have already removed the interior intercom and replaced it with a wall tablet. I am hoping to replace the exterior speaker with a video doorbell, but I can't figure out how to remove it. It's 5" x 3" and has no visible screws or recessed holes. I haven't been able to find anything similar to this online. Any thoughts?

you are viewing a single comment's thread
view the rest of the comments

[–] Bgrngod@alien.top 1 points 11 months ago

If it was me dealing with it, I'd pry the metal bit off with a flathead. If that didn't work, the plyers and a lot of cursing are coming out. If that fails, crowbar under the outer lip until it explodes into pieces I can get a good grip on to pull everything out bit by bit.

It's on brick. I bet it breaks before the brick does.