Just break it. It is garbage anyway.
Home Automation
Home automation is the residential extension of building automation.
It is automation of the home, housework or household activity.
Home automation may include centralized control of lighting, HVAC (heating, ventilation and air conditioning), appliances, security locks of gates and doors and other systems, to provide improved convenience, comfort, energy efficiency and security.
Warning: Working with electricity can result in injury, property damage, or even death if it is not done properly. Please keep this in mind while assisting others. If you are not sure about what you are doing, hire a licensed professional.
Rules
- No abusive behaviour. This is a forum for friendly discussion; personal attacks will not be tolerated and you will be banned without warning.
- Referral/affiliate links are NOT ALLOWED!
- NO POLITICS! There are plenty of other communities to discuss them; this is not one.
- When posting project details must be included. Posting a video or image without detail will result in a removed post and may result in a ban.
- Crowdfunding links are not allowed.
- Reposts, low-effort content and karma farming may be removed at the discretion of the mods. Posters may be banned without warning.
Hammer ought to do it
The problem with just breaking it on an older house is that you find a non-standard mounting box or just something weird underneath it.
Breaking stuff means you have no way to cover the hole when you find out you can't replace it with anything. :)
If his plan is to get rid of it, he probably has already figured out how he is going to deal with the hole left behind.
What is the advantage of taking the time and effort to remove it in one piece just to toss it in the garbage?
I would bet money that the metal grille is what pops off, and the screws for the rest of the faceplate are underneath.
Source: me after ten years of guessing in my own 1970's home.
Came here to say this, source: house was built in 1974 and had similar systems intact.
If it was me dealing with it, I'd pry the metal bit off with a flathead. If that didn't work, the plyers and a lot of cursing are coming out. If that fails, crowbar under the outer lip until it explodes into pieces I can get a good grip on to pull everything out bit by bit.
It's on brick. I bet it breaks before the brick does.
The screen likely pops off giving access to screw holes. Failing that do what the other commenter says.
https://postimg.cc/gallery/9cZKcdS
You guys were right. Mesh screen was just held in by side tabs. This allowed me to see the metal back plating. No screws actually hold the plastic cover on though. I just used the metal back plate as leverage to walk the plastic cover forward, pulling out the two corner plastic push-in pins. The screws seen are for holding the metal back plate in. I appreciate the suggestions and help, thank you!
HammerTime
Keep it, it's kinda cool and period correct
Likely pry off.