Homelab

371 readers

3 users here now

Rules

Be Civil.
Post about your homelab, discussion of your homelab, questions you may have, or general discussion about transition your skill from the homelab to the workplace.
No memes or potato images.
We love detailed homelab builds, especially network diagrams!
Report any posts that you feel should be brought to our attention.
Please no shitposting or blogspam.
No Referral Linking.
Keep piracy discussion off of this community

founded 1 year ago

MODERATORS

communick@selfhosted.forum

rglullis

HPE DL380 Gen10 w/ 6132 Gold idle power consumption too high!? (alien.top)

submitted 11 months ago by dergutemeister@alien.top to c/homelab@selfhosted.forum

16 comments fedilink hide all child comments

Hi there,

I am just surprised this machine I got from a refurbished sale has quite high power draw. Even when I remove all of the peripheral parts and just leave one CPU in the chassis, so remaining just:

- 1x Xeon Gold 6132 (14c/2.6 GHz, 140W TDP), 2x 32 GB RAM 2400 MHz

Even then, idling (no OS, just in UEFI mgmt.), the machine draws at least 112 Watts from the socket from which 64W go to the processor and 6 to the RAM (says iLo). The remaining 40 or so Watts are lost in the system.

When I install the 2nd CPU the CPU draw rises to ca. 120W, so I already got a good saving here.

Nevertheless I find this a bit too much, also considering some other testing labs results which seem to be significantly lower. For ex. see here, which supposedly not only shows CPU but the whole system consumption.

Do you have any explanation for this?

Thanks and cheers

you are viewing a single comment's thread
view the rest of the comments

[–] dergutemeister@alien.top 1 points 11 months ago (1 children)

hmmm, was thinking about this, too. Let me check!

Apart from that - I need this thing kinda job-wise and it has been purchased with several future tasks in mind. Will be a Proxmox server for Windows/Linux on ZFS. So the choice of hardware type is no accident.

But it was indeed difficult to find out about power draw in advance. I researched it but did not get any great results. Servethehome was a source but for ex. it was even impossible to find out what happens if you pull out one CPU. The opinions about savings went from 0% to 50%. The board servethehome uses is this one

Thanks anyway for the (unforgiving) comments ;) At least good to know it is not that much for a server of this type. I'll get back to this post after installing Proxmox and updated power draws.

[–] 100GHz@alien.top 1 points 11 months ago

It's a 14nm tech that Intel polished and polished, but remained 14nm tech. If power is a concern, look into Optiplexes , Ryzens, the new Intel CPUs, etc.