Homelab

371 readers

3 users here now

Rules

Be Civil.
Post about your homelab, discussion of your homelab, questions you may have, or general discussion about transition your skill from the homelab to the workplace.
No memes or potato images.
We love detailed homelab builds, especially network diagrams!
Report any posts that you feel should be brought to our attention.
Please no shitposting or blogspam.
No Referral Linking.
Keep piracy discussion off of this community

founded 1 year ago

MODERATORS

communick@selfhosted.forum

rglullis

Mikrotik CRS317: Actual throughput in L3/managed mode? (alien.top)

submitted 11 months ago by WrongColorPaint@alien.top to c/homelab@selfhosted.forum

7 comments fedilink hide all child comments

I have a CRS317 (idk the numbers, 16x sfp+ and one 1gbe rj45). I've had it running SwOS for years with my esxi hosts connected to it. My home network is a router on stick setup and it's been awesome for ~10 years.

But with all this pfsense plus fees and money garbage, I'm thinking about putting the microtik crs317 into routeros L3 mode so I can buy a netgate box like 1100/2100 (and get pfsense plus with the appliance).

Wondering what people's real-world experience is with routeros on the crs317 switch? I can currently saturate 10gbe and part of my battery backup and shutdown procedure is based on the timing of those transfers/migrations, etc. so while I don't need to absolutely keep every bit of 10GbE, I can't go down to something like 2.5GbE.

Thanks.

I guess if the mikrotik won't work: Should I buy a router? Should I buy a Cisco sx550x 10gbe switch? Thx.

you are viewing a single comment's thread
view the rest of the comments

[–] WrongColorPaint@alien.top 1 points 11 months ago

Having L3 at the access switch layer have other benefits.

Thx. for the response. I bit the bullet and bought a second identical machine (lenovo tiny m720q) to what I'm running now with pfsense. When it gets here and I get it together I'll run the second machine with opnsense, in parallel to the current pfsense setup. I'll probably do something like a double-nat and use opnsense for my esxi and homelab stuff so I can keep pfsense running the rest of the house.

What do you mean other benefits? ACLs? I have pfsense (2x sfp+ lan lacp, 1x mobo gigabit wan), then a Cisco SG500X-24 in L2 mode, then from there I've got the mikrotik crs317 and a bunch of cisco sg300 switches. If I make a change I'd probably offload the dhcp server too. What else am I missing?

Should I try to replace pfsense 1:1 with opnsense for now, and then make changes later (or don't change anything once I'm comfortable)? I've been using essentially the same setup for so long I don't really know much else.