Homelab

371 readers

3 users here now

Rules

Be Civil.
Post about your homelab, discussion of your homelab, questions you may have, or general discussion about transition your skill from the homelab to the workplace.
No memes or potato images.
We love detailed homelab builds, especially network diagrams!
Report any posts that you feel should be brought to our attention.
Please no shitposting or blogspam.
No Referral Linking.
Keep piracy discussion off of this community

founded 1 year ago

MODERATORS

communick@selfhosted.forum

rglullis

Can you easily bond two 2.5GbE ports? (alien.top)

submitted 11 months ago by Halada@alien.top to c/homelab@selfhosted.forum

12 comments fedilink hide all child comments

I just had fiber installed yesterday and got a 3Gbit plan.

The modem provided by the ISP has 1x 10GbE port and 4x gigabit ports.

I got a 10GbE NIC for my Synology NAS, which is installed right beside my modem.

However my PC is sitting at the opposite end of a 30m+ Cat5 run. The silver lining is there's a pair of them.

Can I bond them somehow to make them a single 5GbE port?I haven't bought a switch or router yet.

Considering the Mikrotik crs317-1g-16s+: https://www.ispsupplies.ca/MikroTik-RouterBOARD-CRS317-1G-16SRM

you are viewing a single comment's thread
view the rest of the comments

[–] AnomalyNexus@alien.top 1 points 11 months ago (1 children)

3G/s and a SSD might be able to saturate it f you're lucky.

The one is bits the other is bytes ;)

Network...3 gigabits, while a decent nvme gen 4 can do 4-5 gigabytes

Even old SATA connected SSDs should be able to keep up if you don't buy trash.

[–] kY2iB3yH0mN8wI2h@alien.top 1 points 11 months ago

Most ppl might even have spinning drives, they can do ~100 Mbyte/s..
Some have upgraded to SSD, that can do up to ~500 Mbyte/s.
And a few have upgraded to NVME, most are in the range of 1000-2500 Mbytes/s

All these numbers are for fresh new drives.

3 Gigabit = 375 MBytes/s. Yes I can do the math!