this post was submitted on 30 Nov 2023
1 points (100.0% liked)
Homelab
371 readers
3 users here now
Rules
- Be Civil.
- Post about your homelab, discussion of your homelab, questions you may have, or general discussion about transition your skill from the homelab to the workplace.
- No memes or potato images.
- We love detailed homelab builds, especially network diagrams!
- Report any posts that you feel should be brought to our attention.
- Please no shitposting or blogspam.
- No Referral Linking.
- Keep piracy discussion off of this community
founded 1 year ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
You have completely misunderstood the different measurements and what they mean.
A standard rack is specced as 19" or 482 mm. This refers to the maximum width of a chassis that will fit into such a rack. That Silverstone chassis is a 19" width chassis. It will likely fit inside your rack no problem.
The measurement for the Silverstone rails is likely the minimum depth, not width. These rails are designed to attach to the vertical rails that are at the front and rear of a rack. To properly support a large bulky chassis like this one the sliding rails are attached to both the front and rear vertical rails in the rack.
All you need to ensure is your rack has at least 570 mm distance between the front and rear vertical rails to attach the Silverstone sliding rack rails for your chassis.