Homelab

371 readers

3 users here now

Rules

Be Civil.
Post about your homelab, discussion of your homelab, questions you may have, or general discussion about transition your skill from the homelab to the workplace.
No memes or potato images.
We love detailed homelab builds, especially network diagrams!
Report any posts that you feel should be brought to our attention.
Please no shitposting or blogspam.
No Referral Linking.
Keep piracy discussion off of this community

founded 1 year ago

MODERATORS

communick@selfhosted.forum

rglullis

Question about PCI slot power (alien.top)

submitted 11 months ago by Michelfungelo@alien.top to c/homelab@selfhosted.forum

3 comments fedilink hide all child comments

I have a Asus z590-p and want to pair a 1050ti and a rx550 in the x16 slots, the board has no extra board delivery socket lile some high and boards. Will every card be able to pull 75w or is the 75w shared, also is the power delivery with a 11900k enough? The PSU won't be the problem, 1200w titanium. I just want that the GPUs don't choke on power.

you are viewing a single comment's thread
view the rest of the comments

[–] kester76a@alien.top 1 points 11 months ago

Pretty sure it depends on the slot but most fully wired pcie x16 slots will give 75w. Don't take it as a given though so read what it says next to the slot on the motherboard.

Ripped from wiki

Power

x1 cards are limited to 0.5 A at +12 V (6 W) and 10 W combined.

x4 and wider cards are limited to 2.1 A at +12 V (25 W) and 25 W combined.

A full-sized x1 card may draw up to the 25 W limits after initialization and software configuration as a high-power device.

A full-sized x16 graphics card may draw up to 5.5 A at +12 V (66 W) and 75 W combined after initialization and software configuration as a high-power device.[22]: 38–39

The main 12 V power supply for the PCIe slot is pins B2, B3 (side B) and pins A2, A3 (side A). Power standby 3.3 V is pin B10 and A10. PCIe x1 cards can receive up to 25 W and x16 graphics cards can receive up to 75 W.