Linux

48181 readers

983 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
No misinformation
No NSFW content
No hate speech, bigotry, etc

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 5 years ago

MODERATORS

nooter692@lemmy.ml

AgreeableLandscape@lemmy.ml

MarcellusDrum@lemmy.ml

cypherpunks@lemmy.ml

cyclohexane@lemmy.ml

d3Xt3r@lemmy.nz

Linux file transfer speed bottlenecks? (midwest.social)

submitted 9 months ago* (last edited 9 months ago) by archomrade@midwest.social to c/linux@lemmy.ml

18 comments fedilink hide all child comments

I'm currently watching the progress of a 4tB rsync file transfer, and i'm curious why the speeds are less than the theoretical read/write maximum speeds of the drives involved with the transfer. I know there's a lot that can effect transfer speeds, so I guess i'm not asking why my transfer itself isn't going faster. I'm more just curious what the bottlenecks could be typically?

Assuming a file transfer between 2 physical drives, and:

Both drives are internal SATA III drives with ~~5.0GB/s~~ ~~5.0Gb/s read/write~~ 210Mb/s (this was the mistake: I was reading the sata III protocol speed as the disk speed)
files are being transferred using a simple rsync command
there are no other processes running

What would be the likely bottlenecks? Could the motherboard/processor likely limit the speed? The available memory? Or the file structure of the files themselves (whether they are fragmented on the volumes or not)?

you are viewing a single comment's thread
view the rest of the comments

[–] MNByChoice@midwest.social 5 points 9 months ago* (last edited 9 months ago)

Looks like you have your answer, but there are a crazy number of possible issues.

The biggest cause is misreading the performance specs.

A partial list of other options:
Mechanical drives store data in rings. Outer rings have higher speeds than inner due to constant angular velocity.
Seeks cost a lot of throuput on mechanical drives.
Oversubscribed drive cables.
HBA issues.
PCIe data path conflicts
Slow RAM
RAM full or busy
Extra cpy within RAM
NUMA path issues (of drives are connected to different NUMA nodes. Not an issue on desktops.)
CPU too busy
Transfer software doing extra things
File system doing extra.
RAID doing extra.
NIC on a different NUMA node than HBA (can be good or bad).
NIC sharing the data path in a conflicting way.

There are others. Start with checking theoretical performance from data sheets.

Also, details matter, and I don't have enough of them to guess.