this post was submitted on 18 Apr 2024
30 points (96.9% liked)
Buy it for Life
4490 readers
36 users here now
A place to share practical, durable and quality made products that are made to last, with an emphasis on upcycled and sustainable products!
Guidelines:
Things that are well-made and durable (even if they won't last a lifetime) are A-Okay!
Unlike that other BIFL place, Home-made and DIY items are encouraged here, as long as some form of instruction is included in the body of the post.
Videos links are not allowed as post titles, but you may use them in a text post.
A limited amount of self-promotion is accepted, IF the item you are selling aligns with this criteria:
- The item must be made with sustainable or recycled materials.
- If electronic in some way, the item must be open-source.
- The item must be user-serviceable (if applicable).
- You cannot be a large corporation.
- The post must be clearly marked with a [Self Promotion] tag in your title.
founded 1 year ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Even if they were able to last that long, I wouldn't recommend that someone try to buy it -- or any other PC component -- for life. Technology advances.
In 1984, if you had a Mac, your mouse probably interfaced via the Mac's dedicated mouse port. That became obsolete a couple models down the line, replaced by Apple Desktop Bus.
If you had a DOS PC, you probably had a (checks) RS-232 port. That was replaced by the PS/2 port.
Then both got replaced by USB.
Now, USB-A plugs are on the way out, being replaced by USB-C.
I know that at least ADB was not -- as USB is -- designed to be electrically safe to unplug and plug in while the computer was active. I wouldn't be surprised if the same were true of other ports as well.
A Mac mouse would have one button, a PC mouse probably two. There would be no scroll wheel. Mice have since acquired a scroll wheel, and that scroll wheel has become clickable (and sometimes tiltable). My current mouse has five buttons, includes a forward and back button; that's not universal but also isn't uncommon today.
They used a mechanical ball and electro-optical encoders. These could gum up with hand oil and dead skin and such and would need to be cleaned. Now most mice use a CCD to detect motion, and the current ones are a lot better then the early ones, which would occasionally "twitch" around a bit.
I don't know the polling rate back then, but until relatively recently, mice weren't polled at rates capable of keeping up with many current monitors (which have gotten into 144 Hz and higher -- I have a 165 Hz display, and there are 240 Hz monitors out). Both would have had a considerably lower polling rate than the thousand-plus Hz that current mice can typically report their position.
Resolution is also much higher.
And some people -- I'm not in this camp myself -- really want wireless mice. That wasn't available until recently, and only really standardized in the form of Bluetooth pretty recently.
Point is, even if one could get mouse switches that would last a lifetime, one probably doesn't want to do so. The technology isn't mature enough for things to be holding in place, for a mouse made even relatively-recently to be technically comparable to current mice.
I had a wireless mouse in 2004....
Well, okay, yes. I dunno, I didn't mean "buy it for life" that literally, I suppose. I want something that doesn't break easily, or is repairable.