3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
FDM seems easier tbh. I just slice and throw it on the printer I have a Creality k1 atm and it just goes. I don’t need to worry much about anything. I’d say resin has a bit more to dial in. And clean up is another thing. But I agree probably sticking with elegoo.
https://www.tableflipfoundry.com/download/the-cones-of-calibration
Combine that with the multiple exposure function of UV tools and calibration is dead simple. Way way way less complicated to get the best quality out of resin compared to FDM.
And a wash and cure is going to be money well spent. I've tried a bunch of cheaper alternatives and nothing compared to the simplicity and functionality of the wash and cure system. I also only use alcohol in mine because it's easy to put outside in disposable trays to evaporate and then when the leftover resin in the bottom cures it can just be thrown away.